- XFlow Lead replacement options
- Info Request: 1300 xflow so slow!
- Crossflo gas in coolant
- Max ign setting 1600 ohv 711M, chambered head, flat top pistons
- Pinto Cam identification
- Info Request: What alternator for Xflow?
- Is my pinto engine scrap- not run for years, water left in!
- dynamic compression.
- pinto inlet short turn
- timing sprocket cover
- Girling brake master cylinder needed
- Pinto Veicomer pinto cnc porting
- XFlow valve clearance
- Pinto Pinto Race Engine Refresh
- Help Wanted: pinto std cam timing issue
- Getting my pinto plans together!!!
- Help Wanted: Pinto Head gasket issue / pinging noise
- Head choice
- Pinto Dry Sump
- Pinto Wills Rings Question
- Help Wanted: AN10 With Oil Temp Sensor
- Pinto No change to idle when ignition lead disconnected from #4
- XFlow xflow not runing properlly
- XFlow Flywheel weight for my 1370 xflow
- Best alternator for xflow ?
- Info Request: 205 Block- turbo build
- Pinto Bike Throttle Bodies - Which ECU?
- Info Request: Xflow rocker noise
- Help Wanted: X-flow water pump connector
- Help Wanted: pinto 2.0 205 compression ratio
- Propshaft
- Help Wanted: H&H pinto ignition system using Vauxhall dry coil
- pre xflow sump pan
- Pinto stroker for rallycross
- Info Request: Cams, cams and more cams... But which one suits me best?
- Either way Righ or wrong
- changing from dcoe 40's to 45's?
- What is good coil to pinto with Bosch distributor?
- Pinto High torque, low revving Pinto - ideas?
- How To: X-flow Flywheel removal. What socket size?
- BDA Race length valves
- Idf carbs
- Head gasket set. What brand and where to buy
- Tappet Adjusters
- XFlow Hmmmm Twin dcoe or stick with the DGV?
- Valve springs
- Stupid(?) question of the day. Xflow pulleys balanced?
- Info Request: Ashley manifold
- Crank Bearing Coatings and Installed Clearances
- Rev limiter