- Info Request: Pinto turbo
- Pinto head and cam options
- 1.6 turning by hand results in lower pulley slipping
- Info Request: What is the difference between 681F6015DA and 711M6015BA
- X-flow piston rings
- Retroject on Pinto 2.0
- Newman, or Kent cams?
- Pinto turbo injectors, standard efi max?
- Help Wanted: Weak spark on cylinder one
- pinto victor reinz head bolts torque
- pinto oil leak from head gasket
- Is my dizzy f****d
- Info Request: Pinto radiator cap
- Info Request: Pinto vernier pully
- ticking noise, Pinto, but NOT a worn camshaft
- Info Request: Pinto dizzy question
- XFlow Twin Cam Build on 711M Block
- Head gasket
- BDA BDA Engine block Paint Colour/Code.
- Info Request: Solex 35 35 eeit on 2.1 pinto
- “Interesting” Run In Procedure
- Pinto Chassis Alignment
- Boring out an early 1600 pinto
- Standard Pinto Injection system pump
- Info Request: Best cam
- best new pinto oil pump
- Pinto alternator
- Info Request: Porting twin weber inlet manifold
- Info Request: Ignition advance curve
- XFlow Race engine unknown reason for loss of power
- General info on fuel pressure reg.
- Info Request: Pinto starter issue
- Weber DCOE 45s on pinto 2.1 - Idle jet size
- XFlow Carb kit
- XFlow BCF3 vs 244 Real life power figures
- Help Wanted: Carb kit
- Info Request: Pinto / YB block strength
- Brake servo
- Cosworth n/a engine breathing
- Calling all pinto builders(graham)
- Info Request: Pinto cam belt tensioner bolt size
- Engine Mounting Brackets Escort Mexico RHD
- Pinto electric fan temps
- Pinto turbo help
- Pinto turbo engine with yb internals - advice?
- Pinto build
- Oil capacity pinto with RS sump question
- Sleeving a 205 block and sleeving non 205 blocks ?
- Info Request: Pinto crank pulley
- Some advice for my Pinto