Duratec I4 Conrod Size

[reedy]

Does anyone have a dimension drawing for the Ford Duratec I4 2.0 litre engine conrod please.
Thanks in advance.

[SidewaysMk1]

when u say I4 u mean the 8v versions etc?? if so i do have the info u want.

[reedy]

I'm after the 16v engine sizes. The engine is fitted to the ST Fiesta, the current mondeo, and I think the Ranger maybe aswell.

Thanks.

[RWD_COS]

The Ford "in house" name for the Duratec HE is the Mazda I4. The late 1980's to mid 1990's 8V and 16V engine found in Sierra's, Granada's and the 16V in the RS2000 etc is the DOHC I4.

As for conrod data what dimentions do you need ?

[reedy]

I want the small and big end sizes, and the length between centres. Basically I'm looking to buy some steel rods, I've found a company that does lots of different engines, but not the Duratec. The bloke wants the sizes to check stock with his supplier.
Thanks.

[RWD_COS]

Engineering drawing for 2.0l Duratec HE conrod part number 1S7G-6205-AG.

Small End 20.975 +/- 0.01 mm
Big End 50.035 +/- 0.01 mm
Distance between big and small end centres 146.25mm

[reedy]

Thanks for that.

[mk1matt]

Let us know a price if you find any please:thumb:

[reedy]

Will Do....

[RWD_COS]

Got my 2.3 Rods from Eagle is the USA.
They are $400 a set including ARP big end bolts.
With shipping, import duty and VAT cost about £300.
That was over a year ago, the pound is a lot stronger now.
A set will cost just over £200 plus shipping, import duty and VAT, which is very good. As to buy the ARP big end bolts over here from Burtons is about £60.

Here is the link.
http://www.eaglerod.com/products/Ford/4cyl/4cyl%20rods.html

[reedy]

Thanks,
I've E:Mailed them about the 2.0.

[reedy]

Just had a response.
Unfortunately, they only supply 2.3 rods.

Gutted !