crank wheel and sensor

[logie]

I need to know where a can get a 36-1 crank wheel and sensor for a serria cosworth

[sibster]

http://cgi.ebay.co.uk/Cosworth-36-1-front-pulley-trigger-mountune-race-rally_W0QQitemZ330206222065QQihZ014QQcategoryZ21654QQrdZ1QQssPageNameZWD1VQQtrksidZp1638.m118.l1247QQcmdZViewItem

Steve Scott at A1 rally spares.....you'd have to specify what pulley type you were fitting to it (poly vee or wedge)

Or the small turbo Esc Cos has a 36 tooth wheel standard, just cant find a pic......


HTH

Ian

[logie]

cheers mate, will that work with the standard sensor?

[sibster]

What exactly are you trying to do pal ? ...on my car we use a 36 tooth wheel, with standard crank sensor but on Pectel management... its the pectel that requires the 36 tooth pick-up. If you are on an after market ecu and it needs a 36 tooth wheel the chances are it'll work on the same principle (inductive halls effect ) type so the standard sensor should be fine....

[logie]

i am going to be running emerald so sounds like its going to work with just buying a wheel. cheers mate