Template For Dizzy

[SAF_Capri]

Does anyone know where i could get a template to make the bracket required for front mounting my dizzy.:dunno:

thank you in advance

[Zetec_Escorts]

Dont bother with a dizzy, use a megajolt. Far better in the long run.

[SAF_Capri]

will do later, but already have the dizzy needed, coil, leads, and carbs. really need a capper with the convesion done to see how they went with the servo, mounts and 7 degree or straight

[meXEco]

If you have the dizzy and exhaust pulley wheel/pulley you could mock one up from plate steel-this is the one i bought a few years ago-never fitted it but its just plate with a few holes that line up with holes in the block to fix the bracket, then a hole for the dizzy with slotted bolt holes to allow tensioning of the drive belt.

http://media.turbosport.co.uk/2008/2/2008022417235265198mantadizzy%20%28600%20x%20450%29.jpg

:thumb:

[SAF_Capri]

I think thats the way im going to have to go, great info as always MEXECO, thanks :thumb: