LCD touch screen for MS

[wildo105e]

Found these while pricing up a kit to build another MS http://www.diyautotune.com/catalog/lcdash-digital-touchscreen-dash-display-megasquirt-p-167.html

Has anyone used one etc. If they work out around Half price from dollars then offset against a AFR gauge they look good especially if they get the datalogging working.

Any thoughts appreciated as i am still a rookie at this game:D

[andrewr]

If you want an AFR guage the cheapest is to buy a 0-2V voltmeter and shift the decimal point. Just set the output of an LC-1 to 1-2:10:20. They are about $25 Aus on ebay and mount very neatly in the car.

The LCD displays are very nice though!!

[MK2~COSWORTH]

how much is this diyauto tune matey??? do you get everything in the one package???

kind regards

[alladdin]

diy autotune is the shop:D and a good one:thumb:

looks v.nice but ive enough work without buying more:bolt:
and if it was me then i would wait untill its been developed/ expanded more:thumb:

[joeyjonsey]

If you want an AFR guage the cheapest is to buy a 0-2V voltmeter and shift the decimal point. Just set the output of an LC-1 to 1-2:10:20. They are about $25 Aus on ebay and mount very neatly in the car.

The LCD displays are very nice though!!

hey mate this is interesting as i borrowed my mates lc-1 and couldnt take it for a drive cause of my dead laptop battery but i had a quick look at changing the output settings so i take it you change to AFR mode then 1 volt = AFR 10, 2 volts = AFR 20 ? just questioning as when i ran it it didn't need the decimal point moved , i'm using a normal testing voltmeter rather than the ebay ones

cheers

[andrewr]

Moving the decimal is required to make it read right. For example, 10:1 will read 1.00 on the voltmeter. If you shift the decimal you get 10.0.

Its not required but is nicer IMO.

[joeyjonsey]

yes mine already reads like 10.00 so i thought i must of put the wrong figures for the output.. cheers for that anyway