The lc project... [Archive] - Turbosport Forums

2Smoke

04-02-2002, 20:22

errrr as it is now.. front and back ends in bar needing a top shock mount making, not much to look at I know, but it shows a start!

Paul
http://media.turbosport.co.uk/2002/2/200224191816236782.jpg

2quick4u

13-02-2002, 19:16

Keep us updated as it progresses, always nice to see other peoples work.

carl_harker

13-03-2002, 10:26

How are you going to do the rear mono shock, as you have got rising rate linkages as opposed to the standard cantlever? You gonna build the frame out to keep it upright (10 degree lean works well).http://www.turbosport.co.uk/images/smilies/laugh.gif

2Smoke

19-03-2002, 21:52

Am going to keep the linkages for sure.. will also have an adjustable ride height system, am still trying to work that one out though, probably a bracket that attaches to the top of the shock that attaches to the frame mount by a vertical dowel, which I'll be able to fit washers to in between the mount and frame mount. Hope that makes sense!

Not much progress to report, but have sourced a powervalve engine and assorted gubbins. Also have a set of early Jim Lomas pipes on the way, and a set of calipers and disks off an early ZXR750.

Mainly waiting for my engineer to wire his lathe in before I can go any further as he has the frame and yokes to make spacers etc..

Will keep em coming!

Paul