new cam

[maRvS]

i know it's been asked a miilion times b4 http://www.turbosport.co.uk/images/smilies/snore.gifbut whats the best cam i can put in my s2 http://www.turbosport.co.uk/images/smilies/confused.gifit's chipped,stainless zorst,piper x filter & a cossy 2wd i/c in progress.i would like more mid range to top end http://www.turbosport.co.uk/images/smilies/banana.gif

[Ryan_RST]

piper t or t2 depending or spec of head and turbo, if standard i would say the normal 285T

[markb]

I'd go for Power Engineering sx428t... well in fact i have!

http://www.turbosport.co.uk/images/smilies/smile.gif

[maRvS]

thanx chaps,is there a web site 4 power engineering http://www.turbosport.co.uk/images/smilies/banana.gif

[markb]

yup:

http://www.powerengineering.co.uk

funnily enough http://www.turbosport.co.uk/images/smilies/wink.gif

Nopt much ford stuff on there these days though... best to phone them!

Cheers,

amrk.

[MarK4]

I got the PE SX428 cam aswell and I personally wouldn't get anything else, saying that I have used a Kent cvh35 and found that to also be a good cam.
markb_s1 - are you down sutton much mate I only live down the road from ya in thornton heath.

Mark

[maRvS]

what kind of power increase will pe sx428 give me & is it avalible in a kit with lifters & all that.
cheers http://www.turbosport.co.uk/images/smilies/clap.gif

[markb]

Mark4 - nah, not been down there for years mate... keep meaning to go btu never quite make it, and my car's been off the road for so long now I'm starting to think i never wilL!

marv - to be honest mate it totally depends on the spec/condition of the rest of your engine... dunnop it it coimes in a kit.. when mine was fitted it had motorsport lifters etc with it... speak to the guys at Powers is probably your best bet.

Cheers,

Amrk.