Printable View
I need to order a new fan belt. Just the one that goes from crank to fan to alternator. No adjuster and multi v ribbed
The one pictured here
i43.tinypic.com/30rtfts.jpg
I keep ordering them and now have a selection of useless fanbelt. .. I need the proper part number please !
Someone?
Best think to do is measure what you need in MM a decent factors can the supply you the correct size most belts read PK then a a number this translates to the size in MM.
The alternator bracket in that picture looks like a mk1 mr2 AW11 and certainly not rwd or 20v given thats a AW11 water inlet housing. Take a look at the epc data in the link below gives you the oem part numbers for the belt in question for that chassis code.
http://toyota-europe.epc-data.com/mr...e/1605/16361A/
See if the belts you've ordered previously cross reference with any of these as you may have been ordering belts for the wrong bracket arrangement which could explain the issue.
HTH.
Thankyou all for your help
the actual bracket I have is this one ;
dorihachigo.zenfolio.com/img/s8/v9/p231528867-4.jpg
I will be using the measure method next !
Ah that is the AE86 mount in which case you need these part numbers, although comparing the AW11 and the AE86 belts, it looks like they both used the same belt, i'm sure the last three numbers denote the length too.
http://toyota-europe.epc-data.com/co...e/1605/16361A/
I would measure up the length and then see what it ties in length wise with the part numbers above.
I think I may have a belt that worked on an ae86 mount down my workshop so will have a check when i'm down over the weekend if it helps.