im need a v8 rover bellhousing does anybody know anybody who does these rover bits

[sidewaysbo]

i am looking to fit a 3.9 rover v8 in my sierra 3 door i need an sdi box and bellhousing clutch arm bearing the lot really but i have an aternative i have the chance of a t5 butneed a bellhousing arm and bearing does anybody know where i could get hold of these bits cheers bo

[POO SLINGER]

keep an eye out on ebay.

tvr's were fitted with t5 gearboxes, so get a bellhousing from that

ask this person.

make sure its for rover v8 and not the ajp v8

http://www.ebay.co.uk/itm/TVR-CERBER...item2eb5c5166d

[sidewaysbo]

cheers i didnt know they were different thought if tvr v8 they were the same bellhousing ooops could have caused me a problem thanks for advise bo

[POO SLINGER]

a whole tvr t5 gearbox could be a better setup depending on car as the gear lever is about 4" further forward

[sidewaysbo]

i would get tvr one but bit pricey or lt77 bellhousing as i have the chance of lt77 and need rover sdi flywheel

[sidewaysbo]

Sorted brought at5 and bellhousing cheers bo

[POO SLINGER]

good, wish i'd got a t5 insted of the lt77, the t5 is designed for a v8 anyways.

[sidewaysbo]

cheers poo slinger glad you said that made me feel a bit better now i spent all my remaining cash on a t5 and tvr bellhousing lol