Brembo Brake Upgrade

[Matt75]

Hi Guys,

After having a look at this theadr - http://www.turbosport.co.uk/showthre...=brake+upgrade

I decided to do similar

I ended up using 305x28mm Peugeot 406 rotors. They just required the inside hole widened 2.5mm and new mounting holes drilled.

The calipers are off a Alfa 166 and are very cheap here in Oz.

I am building a race car that I want to be street driven so making my own brackets weren't an option as they'd need to be approved by an engineer so I got some made up from a mate with a CNC machine and I think you'll agree they are sexy indeed.

There is slight pad over hang in the inside of the rotor but a tickle on the pad with a grinder will sort that out.

If anyone is keen I am getting quite a few made up so let me know if you're keen and we can talk

Any way a picture tells a thousand words so here are the pics.

Any questions let me know cheers

Matt

[madragon199]

Hi matt...looks very nice....what size wheels will these fit in...cheers mark...

[Matt75]

Hey mate, they'll fit under 15" rims depending on the wheels.

Cheers

Matt

[madragon199]

nice ...ive been looking for an idea for mine...cheers mark

[Matt75]

Got the brackets all finished now. I got them cnc designed as I want the car to be engineered so I can drive it on the road

Got a few pairs spare of the brackets if anyone is keen

Cheers

Matt

[therealpinto]

Looks nice!

I have gathered most parts to do a similar thing but have not done the brackets yet. Shipping would probably be a killer from Melbourne to Sweden but I'd be interested...but perhaps a screen shot of the drawings first to confirm they fit my calipers etc.?

Regards

Gustaf

[Matt75]

Hi TRP, I didn;t design these so I don't have any pics of the design for you.

What calipers do you have?

If you send me your caliper measurements I'll let you know what the brackets are?

Cheers

Matt

[therealpinto]

I have Alfa 166 Brembos. I can double-check the measurements though.

Regards

Gustaf

[Matt75]

Cool, That's what mine are too so these will def be what you are after. What discs are you planning to run?

Cheers

Matt

[therealpinto]

I have the same Peugeot 406 Coupé discs :-)

So it all should fit then. You can pm me some info on price of you want to sell a set.

Gustaf

[Matt75]

PM sent

[brooky xpack]

Hi Matt, Any chance you have any of these brackets still available after all this time??

[lowscorts]

You could do the same with a bit of flat and two spacers btw

[Arieke]

You could do the same with a bit of flat and two spacers btw

I had spacers made for Fiat couple brembos with 291mm jag disks but. He is taking a long time to make them.

[Arieke]

You could do the same with a bit of flat and two spacers btw

I had spacers made for Fiat couple brembos with 291mm jag disks but. He is taking a long time to make them.