User Tag List

+ Reply to Thread
Page 6 of 6 FirstFirst 1 2 3 4 5 6
Results 201 to 233 of 233

Thread: Thread thread

  1. #201
    Spanner Monkey Tony B.'s Avatar

    Join Date
    Mar 2007
    Location
    Nr Chichester, West Sussex
    Age
    70
    Posts
    309
    Thanks
    21
    Thanked 38 Times in 36 Posts

    Re: Thread thread

    Hi, are the inner track control arm to crossmember bolts different on a Mk1 & Mk2 ? On after market arms there seems to be a lot of slack in the bush.

  2. #202
    Mechanic Bigfish's Avatar

    My 1st Project
    Join Date
    Dec 2009
    Location
    Beds
    Age
    37
    Posts
    911
    Thanks
    55
    Thanked 39 Times in 38 Posts

    Re: Thread thread

    Quote Originally Posted by Tony B. View Post
    Hi, are the inner track control arm to crossmember bolts different on a Mk1 & Mk2 ? On after market arms there seems to be a lot of slack in the bush.
    mk1 and mk2 are the same. its probably because the aftermarket bushes have been made to metric and not imperial

    1974 MK1 Escort - Work in Progress

  3. #203
    Racer Decade Plus User mexicotait's Avatar

    My 1st Project
    Join Date
    Oct 2008
    Location
    whitley bay
    Age
    30
    Posts
    2,461
    Thanks
    86
    Thanked 120 Times in 116 Posts

    Re: Thread thread

    Does anyone know the thread of the studded part coming out of an rs2000 engine mount ?
    Hexham and District Motorclub

  4. #204
    Mechanic Bigfish's Avatar

    My 1st Project
    Join Date
    Dec 2009
    Location
    Beds
    Age
    37
    Posts
    911
    Thanks
    55
    Thanked 39 Times in 38 Posts
    Should be M10

    1974 MK1 Escort - Work in Progress

  5. The Following 2 Users Say Thank You to Bigfish For This Useful Post:


  6. #205
    Racer Decade Plus User mexicotait's Avatar

    My 1st Project
    Join Date
    Oct 2008
    Location
    whitley bay
    Age
    30
    Posts
    2,461
    Thanks
    86
    Thanked 120 Times in 116 Posts

    Re: Thread thread

    Thank you
    Hexham and District Motorclub

  7. #206
    Spanner Monkey fullathepipe's Avatar

    My 1st Project
    Join Date
    Sep 2010
    Location
    Ballymena northern ireland
    Age
    36
    Posts
    369
    Thanks
    20
    Thanked 11 Times in 11 Posts

    Thread thread

    Already posted this in discussion before noticing this part. Cross flow inlet bolts can anyone tell me the thread where you bolt the carb on. I know it's not m8

  8. #207
    Decade Plus User
    Turbosport Subscriber
    Dave's Avatar

    Join Date
    Oct 2003
    Location
    Cheshire
    Posts
    23,117
    Thanks
    167
    Thanked 693 Times in 516 Posts

    Re: Thread thread

    It will be UNC I guess, whichever one a 1/2" spanner fits onto.

  9. #208
    Bodger

    Join Date
    Apr 2013
    Location
    Preston, Garstang
    Age
    27
    Posts
    96
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: Thread thread

    Does anyone know english axle half shaft retaining bolts? X4 on each side? I think they are unf not 100%

    also front leaf spring bolt and rear leaf spring shackle nut?

  10. #209
    Tyre Kicker

    Join Date
    Nov 2014
    Location
    Chesterfield
    Age
    48
    Posts
    48
    Thanks
    27
    Thanked 2 Times in 2 Posts

    Re: Thread thread

    Does anyone know what size bolt goes in the hole to the right of the core plug?


  11. #210
    Spanner Monkey Tony B.'s Avatar

    Join Date
    Mar 2007
    Location
    Nr Chichester, West Sussex
    Age
    70
    Posts
    309
    Thanks
    21
    Thanked 38 Times in 36 Posts

    Re: Thread thread

    Nudger, it's not a bolt, it's the blanking plug for the water jackets. Not sure what size it is but it is a brass hex headed plug and it's tapered so it is probably NPT.

  12. The Following User Says Thank You to Tony B. For This Useful Post:


  13. #211
    Tyre Kicker

    Join Date
    Nov 2014
    Location
    Chesterfield
    Age
    48
    Posts
    48
    Thanks
    27
    Thanked 2 Times in 2 Posts

    Thread thread

    Cheers Tony. Does anyone know what size it should be?

  14. #212
    Bodger

    Join Date
    Apr 2013
    Location
    Preston, Garstang
    Age
    27
    Posts
    96
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: Thread thread

    What size are the anti tramp bolts? That fit through the (front) brackets not axle

  15. #213
    Racer Decade Plus User mexicotait's Avatar

    My 1st Project
    Join Date
    Oct 2008
    Location
    whitley bay
    Age
    30
    Posts
    2,461
    Thanks
    86
    Thanked 120 Times in 116 Posts

    Re: Thread thread

    Thats listed above i posted it


    Inlet manifold bolts are 5/16unc
    Ive just been turning some
    Hexham and District Motorclub

  16. #214
    Racer Decade Plus User mexicotait's Avatar

    My 1st Project
    Join Date
    Oct 2008
    Location
    whitley bay
    Age
    30
    Posts
    2,461
    Thanks
    86
    Thanked 120 Times in 116 Posts

    Re: Thread thread

    If you look through the posts above you will see it has already been listed

    Quote Originally Posted by ScottySportMk2 View Post
    What size are the anti tramp bolts? That fit through the (front) brackets not axle


    1/2 unc
    Last edited by mexicotait; 16-01-2015 at 07:52.
    Hexham and District Motorclub

  17. #215
    I support TS Decade Plus User
    Turbosport Subscriber
    wildo105e's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    Oct 2006
    Location
    Manchester
    Age
    49
    Posts
    2,807
    Thanks
    99
    Thanked 172 Times in 169 Posts

    Re: Thread thread

    does anyone know what size of bolt and thread is used to hold a compression strut cone assembly together. this is the part that clamps through the TCA and is socket head. It seems to be a very fine thread to anything else i have lying around.

    thanks

  18. #216
    TURBOSPORT SPONSOR Decade Plus User
    Turbosport Sponsor
    GP4's Avatar

    Join Date
    Sep 2003
    Location
    Carmarthenshire
    Posts
    1,773
    Thanks
    4
    Thanked 74 Times in 66 Posts

    Re: Thread thread

    Quote Originally Posted by wildo105e View Post
    does anyone know what size of bolt and thread is used to hold a compression strut cone assembly together. this is the part that clamps through the TCA and is socket head. It seems to be a very fine thread to anything else i have lying around.

    thanks

    More often than not it's a 1/2" UNF....

  19. The Following User Says Thank You to GP4 For This Useful Post:


  20. #217
    I support TS Decade Plus User
    Turbosport Subscriber
    wildo105e's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    Oct 2006
    Location
    Manchester
    Age
    49
    Posts
    2,807
    Thanks
    99
    Thanked 172 Times in 169 Posts

    Thread thread

    Ok so did some measuring and got 9.34mm or 0.367 inch which from googling i think is 3/8 so i reckon 3/8 unf x 1 inch does this sound correct not really an expert on imperials👍

  21. #218
    I support TS Decade Plus User
    Turbosport Subscriber
    wildo105e's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    Oct 2006
    Location
    Manchester
    Age
    49
    Posts
    2,807
    Thanks
    99
    Thanked 172 Times in 169 Posts

    Re: Thread thread

    posty dropped some off today. 3/8 unf defo

  22. #219
    Tyre Kicker

    Join Date
    May 2009
    Location
    Dundee
    Posts
    18
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Thread thread

    Can anyone help with nut size for the 4 servo mounting studs? (RS 7" servo, the nuts from a std servo are too small)
    Thanks in advance .

  23. #220
    I support TS Decade Plus User
    Turbosport Subscriber
    wildo105e's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    Oct 2006
    Location
    Manchester
    Age
    49
    Posts
    2,807
    Thanks
    99
    Thanked 172 Times in 169 Posts

    Re: Thread thread

    Quote Originally Posted by ScottySportMk2 View Post
    Does anyone know english axle half shaft retaining bolts? X4 on each side? I think they are unf not 100%
    5/16 unc (i believe just been looking myself) and the diff nuts should be the same just ordered some so we shall see.

  24. #221
    Pit Crew Decade Plus User THEDMAN's Avatar

    Join Date
    Jan 2003
    Location
    Glasgow
    Posts
    1,074
    Thanks
    0
    Thanked 5 Times in 5 Posts

    Re: Thread thread

    Anyone now the front bumper iron bolt thread size, so I can purchase some square nuts to replace my worn ones and weld in?

  25. #222
    I support TS Decade Plus User
    Turbosport Subscriber

    My Race Car
    Join Date
    Jan 2007
    Location
    Dorset
    Posts
    1,279
    Thanks
    177
    Thanked 63 Times in 53 Posts

    Re: Thread thread

    Does anyone know the thread size of the bonnet catch that screws into the inner front of the bonnet?

  26. #223
    Racer Decade Plus User mexicotait's Avatar

    My 1st Project
    Join Date
    Oct 2008
    Location
    whitley bay
    Age
    30
    Posts
    2,461
    Thanks
    86
    Thanked 120 Times in 116 Posts

    Re: Thread thread

    Anyone know the thread of the screws that hold front indicator lense on
    For a mk2 escort
    Hexham and District Motorclub

  27. #224
    I support TS Turbosport Subscriber rallyrob's Avatar

    Join Date
    Apr 2010
    Location
    Middlesex
    Age
    51
    Posts
    1,966
    Thanks
    78
    Thanked 132 Times in 126 Posts

    Re: Thread thread

    I'd hazard a guess at M5 x 0.8 but they might be M4 x 0.7

    I'm sure they'd be metric though as the Mk2 is..

  28. #225
    Racer Decade Plus User mexicotait's Avatar

    My 1st Project
    Join Date
    Oct 2008
    Location
    whitley bay
    Age
    30
    Posts
    2,461
    Thanks
    86
    Thanked 120 Times in 116 Posts

    Re: Thread thread

    No not m5 tried that
    Thinking they might be m4 but a bolt I had that was the same size and thread took a 1/4 socket ?
    Hexham and District Motorclub

  29. #226
    I support TS Turbosport Subscriber rallyrob's Avatar

    Join Date
    Apr 2010
    Location
    Middlesex
    Age
    51
    Posts
    1,966
    Thanks
    78
    Thanked 132 Times in 126 Posts

    Re: Thread thread

    1/4 would be either 6 or 7 mm wouldn't it.

  30. #227
    I support TS Decade Plus User
    Turbosport Subscriber
    Miniliteman's Avatar

    Join Date
    Feb 2004
    Location
    the Netherlands
    Posts
    4,301
    Thanks
    18
    Thanked 449 Times in 417 Posts

    Re: Thread thread

    Quote Originally Posted by mexicotait View Post
    Anyone know the thread of the screws that hold front indicator lense on
    For a mk2 escort
    The indicator lense (to the indicator) or the indicator to the bumper?

  31. #228
    Racer Decade Plus User mexicotait's Avatar

    My 1st Project
    Join Date
    Oct 2008
    Location
    whitley bay
    Age
    30
    Posts
    2,461
    Thanks
    86
    Thanked 120 Times in 116 Posts

    Re: Thread thread

    Quote Originally Posted by Miniliteman View Post
    The indicator lense (to the indicator) or the indicator to the bumper?
    As said indicator lense
    Hexham and District Motorclub

  32. #229
    I support TS Decade Plus User
    Turbosport Subscriber
    Miniliteman's Avatar

    Join Date
    Feb 2004
    Location
    the Netherlands
    Posts
    4,301
    Thanks
    18
    Thanked 449 Times in 417 Posts

    Re: Thread thread

    These screws are M4x12 (sometimes also listed as M4x14).

  33. The Following User Says Thank You to Miniliteman For This Useful Post:


  34. #230
    Racer Decade Plus User mexicotait's Avatar

    My 1st Project
    Join Date
    Oct 2008
    Location
    whitley bay
    Age
    30
    Posts
    2,461
    Thanks
    86
    Thanked 120 Times in 116 Posts

    Re: Thread thread

    thanks miniliteman
    Hexham and District Motorclub

  35. #231
    Racer Decade Plus User Stevie's Avatar

    Join Date
    Aug 2002
    Location
    Geordie Land
    Age
    53
    Posts
    2,485
    Thanks
    8
    Thanked 11 Times in 10 Posts

    Re: Thread thread

    anyone tell me the thread on this please water outlet on pinto inlet manifold please


    MY MK1 ESCORT (Now turbo'd)

  36. #232
    Bodger

    Join Date
    Oct 2012
    Location
    Telford
    Age
    29
    Posts
    131
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Re: Thread thread

    Quote Originally Posted by Stevie View Post
    anyone tell me the thread on this please water outlet on pinto inlet manifold please
    According to my notes it should be 3/8" NPTF, I tapped the same adapter from eBay into a custom inlet manifold and it seemed to tighten down good, added a small dap of thread sealer for good measure.
    Mk1 Escort 1.3 XFlow Turbo - http://bytesandbolts.com/tag/mk1-escort/

  37. #233
    Spanner Monkey

    Join Date
    Apr 2003
    Location
    Liverpool
    Posts
    469
    Thanks
    9
    Thanked 23 Times in 23 Posts

    Re: Thread thread

    anyone know where I can buy a complete nut and bolt

    thankyou. kit for a mk.2 rs2000.

+ Reply to Thread

Similar Threads

  1. Pinto Spart Plug Thread / Lambda Thread
    By Dalek in forum The Technical Section
    Replies: 6
    Last Post: 24-05-2005, 19:04

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts