Hi all hope someone can help me I'm pulling my hair out.
Made up a manifold and attached the zx6r carbs to the pinto, connected up fuel hose etc.
but now Ive come to fitting the throttle cable but I can't get the butterfly on the carb to spring back when the cables attached. I'm using the same cable as I had attached to my twin 40s, the carb themselves release fine when moved by hand.
Ive searched the net and when on the bike they have two cables one is a pull cable? Not really clued up in bike carbs any ideas of how to get it to snap back to the tickover stop would be very much appreciated.
Or photos anything.
thanks in advance
Bookmarks