the boxes should be fitted like the top drawing not the bottom one.
For further info look here......................
http://www.classicrsfords.co.uk/5link.htm
the boxes should be fitted like the top drawing not the bottom one.
For further info look here......................
http://www.classicrsfords.co.uk/5link.htm
I fitted Gartrac two piece boxes to the last one I did, the first part (that connects to the seat x-member & dont forget to cut the top out of the seat x-member so the new mount if flush with the front of the mount) goes in vertically, then the cover just fits onto the floor, and covers the hole where the link bars pass through.
www.RWD-Escort.co.uk
I was a TS overhauler
I don't think this site is in the real (?) world any more
Here's the old version... http://web.archive.org/web/200609170...o.uk/5link.htm
I have four linked my car ,this dose not show much and its a sticky
Just some info I have found
http://www.turbosport.co.uk/showthre...ghlight=4+link
http://www.turbosport.co.uk/showthre...ghlight=4+link
http://www.turbosport.co.uk/showthre...ghlight=4+link
Bit more here-
http://www.turbosport.co.uk/showthre...=101283&page=2
'68 1100 Deluxe-bog stock soon to be a twincam rep.
good info lads,about time a mag did this again
rob v
Rob Virgo
Cork
Ireland
Bookmarks