I am running AFR 13 @ WOT
I am running AFR 13 @ WOT
Turbo charged and at 16psi or more ??
27psi at the moment
The key is to have "low" ignition.
And AFR 13 is only possible with livemapping on the road. If you are on the dyno the engine does not get the same afr with the same map, itīs much richer and still makes the most power then.
Have not found the reason why yet ... Probably something with the wind speed?
Probably something with the wind speed?
Think you are right. I am roadmapping to.
Only my bin with closed loop has some sort of checksum in it.
You have any idea where to disable this ?
Looked into the .bin and didnīt find any obvious checksum correction. (Im not that good at the assembler language )
Try increase one value with 1 hex and reduce another value with 1 hex. If the car starts then it is a checksum correction involved.
I have made these tricks on other cars with checksum correction on them and i didnīt find how the correction counted or didnīt know where the value was stored.
Email me the bin and I will remove the checksum when I have time. clint@turbosport.co.uk
Cosworth Electronics / Pectel Dealer, Syvecs Dealer.
Europes Largest Link ECU Dealer - Aim Sportline Dash and Datalogger Dealer, ECU Master for South East UK
UK Mahle and Reinz Distributor - 3J Driveline Dealer - Corbeau Seat Dealer
ECU & Dash packages preconfigured and custom looms made to order.
Professional conversions - Engine Swaps - Complete Project Design
0% Finance Available on all products and services.
[B]Engine Parts for most makes, all Ford parts kept in stock, Pinto, Xflow, YB, V4, V6, Zetec, Dratec, Wiring Looms Plugs, Plug Kits and Loom Products, Head Refurbishment and Porting, Engine Rebuilding Services.
w: www.shopbhp.com e: sales@shopbhp.com
Like us on Facebook: https://www.facebook.com/brandshatchperformance
Sent
Have you found it Clint?
I tried the .BIN to day on my car , and i can say that itīs NOT a standard checksum calculation. If i change the values so a standard checksum calc would be happy this one is not ...
BTW does this .BIN have datacomm activated? I tried my datacomm logger with it but it didnīt work.
Iīm looking for a .BIN that has datacomm activated so i can calibrate my 5bar map-sensor
Any news Clint ?
Have anyone got hit tracing in Tunerpro to work on P8 box? It only works on L8 for me
Can I get a picture of the chip fitted to the ecu, before I look at the bin ?
Cosworth Electronics / Pectel Dealer, Syvecs Dealer.
Europes Largest Link ECU Dealer - Aim Sportline Dash and Datalogger Dealer, ECU Master for South East UK
UK Mahle and Reinz Distributor - 3J Driveline Dealer - Corbeau Seat Dealer
ECU & Dash packages preconfigured and custom looms made to order.
Professional conversions - Engine Swaps - Complete Project Design
0% Finance Available on all products and services.
[B]Engine Parts for most makes, all Ford parts kept in stock, Pinto, Xflow, YB, V4, V6, Zetec, Dratec, Wiring Looms Plugs, Plug Kits and Loom Products, Head Refurbishment and Porting, Engine Rebuilding Services.
w: www.shopbhp.com e: sales@shopbhp.com
Like us on Facebook: https://www.facebook.com/brandshatchperformance
Hello Clint , you have at post 72 .
Ok I will take a look, I need to set this up on the bench with the ostrich, I am not 100% sure I have a L8 ecu here.
Cosworth Electronics / Pectel Dealer, Syvecs Dealer.
Europes Largest Link ECU Dealer - Aim Sportline Dash and Datalogger Dealer, ECU Master for South East UK
UK Mahle and Reinz Distributor - 3J Driveline Dealer - Corbeau Seat Dealer
ECU & Dash packages preconfigured and custom looms made to order.
Professional conversions - Engine Swaps - Complete Project Design
0% Finance Available on all products and services.
[B]Engine Parts for most makes, all Ford parts kept in stock, Pinto, Xflow, YB, V4, V6, Zetec, Dratec, Wiring Looms Plugs, Plug Kits and Loom Products, Head Refurbishment and Porting, Engine Rebuilding Services.
w: www.shopbhp.com e: sales@shopbhp.com
Like us on Facebook: https://www.facebook.com/brandshatchperformance
Hi Clint , had already time to look at the bin ?
Grts
Patrick
you still into this clint?
Hi Clint are you still into P8 and live mapping would be very interested I am also trying to get a megasquirt running on my Rally Car I have just bought an AEM Peak & Hold DRiver
Hi yes I am still Mapping all of these Weber ECU;s
Cosworth Electronics / Pectel Dealer, Syvecs Dealer.
Europes Largest Link ECU Dealer - Aim Sportline Dash and Datalogger Dealer, ECU Master for South East UK
UK Mahle and Reinz Distributor - 3J Driveline Dealer - Corbeau Seat Dealer
ECU & Dash packages preconfigured and custom looms made to order.
Professional conversions - Engine Swaps - Complete Project Design
0% Finance Available on all products and services.
[B]Engine Parts for most makes, all Ford parts kept in stock, Pinto, Xflow, YB, V4, V6, Zetec, Dratec, Wiring Looms Plugs, Plug Kits and Loom Products, Head Refurbishment and Porting, Engine Rebuilding Services.
w: www.shopbhp.com e: sales@shopbhp.com
Like us on Facebook: https://www.facebook.com/brandshatchperformance
Could you point me in the right direction as far as equipment needed and a few pointers on the P8 file s required
Many thanks
TunerPro - Moates Ostrich 2 - Innovative LM2 or Techedge (an AFR that has logging), eprom reader and writer.
Cosworth Electronics / Pectel Dealer, Syvecs Dealer.
Europes Largest Link ECU Dealer - Aim Sportline Dash and Datalogger Dealer, ECU Master for South East UK
UK Mahle and Reinz Distributor - 3J Driveline Dealer - Corbeau Seat Dealer
ECU & Dash packages preconfigured and custom looms made to order.
Professional conversions - Engine Swaps - Complete Project Design
0% Finance Available on all products and services.
[B]Engine Parts for most makes, all Ford parts kept in stock, Pinto, Xflow, YB, V4, V6, Zetec, Dratec, Wiring Looms Plugs, Plug Kits and Loom Products, Head Refurbishment and Porting, Engine Rebuilding Services.
w: www.shopbhp.com e: sales@shopbhp.com
Like us on Facebook: https://www.facebook.com/brandshatchperformance
Hi Clint, you mention that you have a P8 tuneable by only a RS232 lead... Very interested. Do you have details of the setup that you are running to achieve this?
I have a P8 running a MSD stage 3 with wasted spark from the ecu (not their daughter board). I am also running a T25 inlet and TB, along with the T25 TPS, so am currently running without the ISCV fitted. I would like to do all the live mapping myself from the stage that I am at. Obviously the MSD chip sits on an encryption board, so where am I best starting?
Cheers
Cosworth Electronics / Pectel Dealer, Syvecs Dealer.
Europes Largest Link ECU Dealer - Aim Sportline Dash and Datalogger Dealer, ECU Master for South East UK
UK Mahle and Reinz Distributor - 3J Driveline Dealer - Corbeau Seat Dealer
ECU & Dash packages preconfigured and custom looms made to order.
Professional conversions - Engine Swaps - Complete Project Design
0% Finance Available on all products and services.
[B]Engine Parts for most makes, all Ford parts kept in stock, Pinto, Xflow, YB, V4, V6, Zetec, Dratec, Wiring Looms Plugs, Plug Kits and Loom Products, Head Refurbishment and Porting, Engine Rebuilding Services.
w: www.shopbhp.com e: sales@shopbhp.com
Like us on Facebook: https://www.facebook.com/brandshatchperformance
to remove checksum test on P8 ECU just change value on address 94CF from 27 to 20.
I have a full xdf driver for P8 ecu (tunerPRO). If anybody wants to play with this...
Last edited by midnightman; 03-07-2015 at 23:21.
Hi If you could send me the xdf drive and a little help on how to do this I have a Moates Ostrich 2 on the way and have registered tunerPRo
Thanks
send me your mail to pm
Hi Please mail to k.bennett744@gmail.com
Thanks
Hi there. I have a sierra cosworth with l8 ecu. I bought the ostrich 2 emulator and the tunerpro and I connected to my ecu. Now my problem is that althought I have to xdf and bin file I need I also need the ADX file to live map the ecu. Can anyone help me to thatg pleasE? Thanks!
None? Ohh please help me with the adx file and of cource I will pay if it is needed!
send me your e-mail address and i will send you one
Hi all,
Looking for L8 standard and stage1 bin with tuned fuel and spark table.
Can anyone help?
thanks
Hi Clint
Great to see you are getting better
Could you help with my encrypted P8 can send you the Chip if that is any good?
Thanks Kevin
What do you want from chip, just to decode it ?
Let me know and I can post back to you
Hi Guys
Has anybody tried fiddling around with the injection firing angle degrees.
I am play around with a programable ecu. The car has been dynoed, made 350bhp on pump fuel which is enough for what i needed. What i noticed is that it is using much more fuel , apart from the over run fuel, i was looking into other things that could use alot of more fuel.
Infact i locked the fuel and timing on idle at around 950rpm, and took some readings for different injection firing angles. the best result was at -90 .
The problem is that this is at idle.
I don't know how i can work out the rest of the map.
Any help even with a std map would be very helpful.
Thanks and regards
Cpur
I know this is probably highly illegal - but can someone PM or post up a standard P8 BIN file. I need to burn a standard chip so I can simply test the ECU Fuel Pump prime and ISCV pulse (my ECU doesn't want to do either). This is just to rule out a dodgy Pectel board/chip.
Anyone able to help?
Scratch that, all sorted! Thanks all!
Good morning
I hope my question is not included in the wrong post.
I'd like to know how to figure out each ecu map what does it correspond to?
I read somewhere that there is a sw of marelli called VISION that could serve this purpose, do you think it is so?
thanks for all a greeting to all
you need xdf file for ecu....
on tunerpro sitt you can find l8 and p8 xdf file from me
ok thanks 1000
are the xdfs you made very complete?
I'm also interested in activating strange things like
als
bang
water injection
if possible pop or crackle
(I state that I only need the bang) but I'd be curious to understand
how to activate the whole trip if you can activate it.
P.S. obviously I know that both the engine and the turbo need to be modified, that I will have to fit a larger valve, etc.
a big hello
Relighting an old thread maybe Iv got a cosworth ecu with pectel board in my rs turbo its a l6 with pectel board Been having issues with flagging up knock sensor code my car hasnt even got one it does it around 5000rpm An cut my boost write back Iv tryed everything out 2 other looms As i was advised might be rf signals i rewired a loom with ur screened wires for crank cam an crank sensor an made sure all wires were uncut An it still does it If i post my file could u unencript it so i can use the map on tuner pro if i pay ya a fee want to be able to have a play about aswell as fix my problem I bought a burn 2 programmer Havent got a ostrich yet Iv even got a datamans4 an pectel program but having trouble using it Was told program worked without dongle but im not so sure An im a newb on eproms an older dos programs Im a mechanic an know the basics but learning Im assuming my problem is l6 hasnt got a knock sensor an l8 board does Was mapped by oddkiddcreations It hasnt always done it though Iv even put a diff ecu in aswell So think deffo something in the map
Sorry for the essay
Bookmarks