Dynemma/Plasma winch ropes
Dynemma and plasma winch ropes made to order ideal for recovery trucks or off roading.
Can be made up to any length with any fittings needed, made from quality rope and hardware not the crap you get on ebay from china.
Pm me with what you need for a price.
-
Re: Dynemma/Plasma winch ropes
What size ropes are available ( diameter wise) and what there rated to?
I've currently got 28m of 14mm bow rope on the front winch with a plus 3" drum and 27m of 9.5mm armorertek I think on the rear.
I have tested a few for a local shop on my challenge truck and broke most of them on the 1st long hard pull. The bow rope I still use is the original stuff not what David bowyer sells now.
For anyone who's never used this type over the wire rope, it's a million times better to use and safer
-
Re: Dynemma/Plasma winch ropes
I have some English braids 12mm winch line and some cheaper cortland 11 mm plasma,
The English braids is very good quality rope and 12.6 tonne MBL but you need to take off 10% once spliced this go's for all ropes, I can get some heavier duty rope but this has an over braid to protect the load bearing core rope this then jumps the diameter up to around 14mm not sure if this would fit on your winch drum I can go right up to 17 and 20mm diameter you won't break them they are 30t+ MBL,, it's normally damage or chafing that will break these ropes so an over braided rope might be worth considering.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks