User Tag List

+ Reply to Thread
Results 1 to 21 of 21

Thread: Gary Martin Motorsport (Retromotorsport) Builds and Prices

  1. #1
    Way too much free time Decade Plus User Retromotorsport's Avatar
    My Race Car
    Join Date
    Mar 2004
    Location
    Harlow, Essex
    Age
    55
    Posts
    14,285
    Thanks
    318
    Thanked 173 Times in 164 Posts

    Gary Martin Motorsport (Retromotorsport) Builds and Prices

    Mk1 Escort Cosworth YB spaceframe front , Gringo's Rustcort
    http://www.turbosport.co.uk/showthre...-mk1-rustscort!!!

    Mk2 Escort Van, YBT, arches, 5 link, tunnels bubbles the lot.
    http://www.turbosport.co.uk/showthread.php?t=149491

    105E Anglia, YBT engine 6 linked , Joe at GSM's car
    http://www.turbosport.co.uk/showthre...highlight=Neil

    Mk2 Escort....SP Racing's Class A cossied powered touring car
    http://www.turbosport.co.uk/showthre...ighlight=Shaun

    100E ............full build YBT Engine
    http://www.turbosport.co.uk/showthread.php?t=77595

    Mk1 Escort.....full build YBT engine (Tony the Pigmans car)
    http://www.turbosport.co.uk/showthread.php?t=106725

    M1 Escort .... full build YBT engine(RetroAl's car)
    http://www.turbosport.co.uk/showthread.php?t=87602

    Mk2 Escort.... full build Zetec engine (markB's car)
    http://www.turbosport.co.uk/showthread.php?t=74095

    Mk2 Escort .....Full Build NA YB engine (toymex's car)
    http://www.turbosport.co.uk/showthread.php?t=95758

    Mk1 Escort ... YBT engine " The Goon"
    http://www.turbosport.co.uk/showthread.php?t=77815
    http://www.turbosport.co.uk/showthread.php?t=82163
    http://www.turbosport.co.uk/showthread.php?t=82817
    http://www.turbosport.co.uk/showthread.php?t=83083
    http://www.turbosport.co.uk/showthread.php?t=87392
    http://www.turbosport.co.uk/showthread.php?t=102491
    http://www.turbosport.co.uk/showthread.php?t=101276
    http://www.turbosport.co.uk/showthread.php?t=103515
    Clints engine build for "the Goon"
    http://www.turbosport.co.uk/showthread.php?t=102311

    Mk2 Race Escort Twin Turbo 3.2 Cossie V6
    http://www.turbosport.co.uk/showthread.php?t=82496
    http://www.turbosport.co.uk/showthread.php?t=84251
    http://www.turbosport.co.uk/showthread.php?t=86379
    http://www.turbosport.co.uk/showthread.php?t=98678
    http://www.turbosport.co.uk/showthread.php?t=96477

    Mk2 Escort .. road/sprint car 2.1 Pinto engine
    http://www.turbosport.co.uk/showthread.php?t=76668

    Mk1 Escort 5 link and turrets "monza"
    http://www.turbosport.co.uk/showthread.php?t=91930
    http://www.turbosport.co.uk/showthread.php?t=92418
    and some pics of the car running
    http://www.turbosport.co.uk/showthread.php?t=89478

    Mk2 High speed challenge car (scrote's)
    http://www.turbosport.co.uk/showthread.php?t=115097

    105E cossie engine (105Ian's car)
    http://www.turbosport.co.uk/showthread.php?t=113148

    Mk1 full Race build cossie engine (thrashitmk1's car)
    http://www.turbosport.co.uk/showthread.php?t=123976

    Jensen Healeys
    http://www.turbosport.co.uk/showthre...ght=image-worx


    And some threads on competing cars
    http://www.turbosport.co.uk/showthread.php?t=96492
    http://www.turbosport.co.uk/showthread.php?t=100553
    http://www.turbosport.co.uk/showthread.php?t=104314
    Last edited by Retromotorsport; 27-05-2010 at 16:22.

  2. #2
    Way too much free time Decade Plus User Retromotorsport's Avatar
    My Race Car
    Join Date
    Mar 2004
    Location
    Harlow, Essex
    Age
    55
    Posts
    14,285
    Thanks
    318
    Thanked 173 Times in 164 Posts

    Re: A collection of TS Members Projects

    MK1/2 ESCORT SHELL PREP PRICES


    ITEM ..............................................................UNIT PRICE......FITTING

    CAGES
    Roll Cage 6 point.......................................................£POA..............£250
    Roll cage multi-point and turret mount..............................£POA..............£420
    Adjusting 6 point mk1cage to multipoint and turret mounted.........................£400
    Weld In Prime cage. 6 point plus one diagonal ....................£POA..............£600
    All extra bars at each.......................................................................£50
    Gussets to A an B pillars....................................................................£260MK2 £280MK2
    Door Bar Gussets x4.....................................................................£150
    Safety Devices door bar fitting ......................................................£400
    Safety Devices shaped to fit gussets in curved door bars ...................£300
    REAR SUSPENSION
    Clubman kit .............................................................£220...............£250
    Historic Gp4 kit (long lower bolt).....................................£400...............£300
    RETRO Road - Race kit (multi adjustable+lower ride height).....£350.............. £350
    Tarmac seat x-member ( Gp4)........................................£98................£175
    RETRO Road - Race multi hole bodybox x-member................£175...............£175
    GP4 turrets (round type)..............................................£87................£250
    RETRO Road - Race Low RC Watts Link............................£325...............£400
    RETRO Road - Race Watts link floor raise (inc Tank stand)............................£350
    Standard Gp4 Watts Link.............................................£287................£350
    Standard Gp4 Watts link boot floor raise............................£60................£200
    Gp4 fuel tank stand (spare wheel shaped)......................... £79................£85
    Gp4 Over axle chassis raise ...............................................................£150
    RETRO Road - Race over axle chassis raise ............................................£175
    Extend rear tubs to rear 1/4's (half tub) ................................................£350
    RETRO Road - Race Large rear tubs (rounded edges) .......... £ all in price ......£900
    Fire wall mounts........................................................£20.................£30
    Mk1 Cortina Watts Raise/Escort Shaped Fuel Tank Stand ......................£450


    FRONT SUSPENSION
    Gp4 x-member mounts................................................ £25.................£60
    Welded strut brace.....................................................£50.................£50
    Seam weld front end.........................................................................£110
    Footwells reshaped per side (allows 10" wide fronts) .................................£125
    Footwells corners replaced with new panel per side ......................................£175
    Camber adjustable topmounts (inc alloy tops)..................... £49................ £250


    INTERIOR FITTINGS
    Diff Tunnel Short.......................................................£38................£150
    Medium...................................................................£48................ £175
    Long......................................................................£58.................£200
    Prop tunnel, raise.......................................................£50..................£125
    Prop tunnel, replace with higher tunnel.........................£75.................£175
    Gearbox tunnels from.................................................. £80................£250
    RETRO Road - Race Sequential tunnel ..............................£120................ £360
    RETRO Road - Race Gearbox mount ................................£92................ £50
    Lever gaitors Standard ..................................................................... £50
    RETRO Road - Race removeable surround and gaitor ..................................£150
    Seat mounts tube type................................................ £48.................£30
    RETRO Road - Race Low CofG seat mounts per side ...................................£100
    Seat x-members standard per side.................................. £50................. £45
    RETRO Road - Race seat x-members (punched and swaged) ...£85............... £45
    Fitting over exhaust tunnel .................................................................£20
    Seat belt mounts per point...................................................................£12
    Switch panel in roofFrom ....................................................................£30
    RETRO Road - Race exhaust tunnel ...................................................... £135
    Tarmac Racecar exhaust tunnel, this goes through the fire wall
    And exits through the rear panel allowing a venturi to be fitted ......................£POA


    Exterior Fabrication.
    Works bubble arches x4................................................£450................£350
    Bulge rear arches to allow 11” rims per side............................................... £75
    Re shape leading edge of fr arch for large wheels per side..............................£75
    GP4 arches...............................................................£270-340...........£250
    GP2 arches...............................................................£195................£350
    Front wing replacement (wings off) each side............................................. £65
    Punched and swaged cooling holes in fr panel.............................................£50
    Battery Kill box............................................................£50................ £50Mk1 ... £30Mk2
    Rear Valance cut out..........................................................................£50


    Engine Fitting
    Chassis mounts............................................................£75................£125
    Bulkhead step back (smooth).................................................................From £225
    RETRO Road - Race Spaceframe front end inc bulkhead .................................£1450
    (must be fitted with weld in cage )


    Miscellaneous fabrication
    Pipe/cable clip on tunnels.....................................................................£40
    Punched and swage lightening holes in shell...............................................£250
    Floor panel mounts for raised front floor...................................................£35
    Remove centre prop mount..................................................................£30
    Remove tunnel stiffening bridge.............................................................£30
    Blank paint holes in floor......................................................................£60
    Blank vent holes in c-pillar....................................................................£50
    Remove battery tray..........................................................................£30
    Bulkhead gussets with exhaust cut outs....................................................£50
    RETRO Road - Race bulkhead gussest .....................................................£45
    Bonnet pin weld in nuts........................................................................£25
    Firewall to rear ¼ plates ................................................ £12................£15
    Gp 4 rad cutout and brace................................................£45...............£145
    Tow eyes F/R each removable or flat plate type FIA 50mm ............................£50


    SUPPLY AND FIT ONLY
    All prices correct at time of printing, but subject to change due to suppliers. Prices based on a stripped shell. Restoration estimates subject to agreement on viewing the shell in question.


    Last edited by Retromotorsport; 16-01-2020 at 21:36.

  3. #3
    Racer 4drmatt's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    Jun 2007
    Location
    Bedford
    Age
    37
    Posts
    2,079
    Thanks
    69
    Thanked 29 Times in 29 Posts

    Re: A collection of TS Members Projects

    do these prices include vat?

  4. #4
    Way too much free time Decade Plus User Retromotorsport's Avatar
    My Race Car
    Join Date
    Mar 2004
    Location
    Harlow, Essex
    Age
    55
    Posts
    14,285
    Thanks
    318
    Thanked 173 Times in 164 Posts

    Re: A collection of TS Members Projects

    yes .. and theres a discount for TS members and a bigger discount for TS subscribers

  5. #5
    Spanner Monkey

    Join Date
    Aug 2005
    Location
    preston
    Age
    40
    Posts
    240
    Thanks
    17
    Thanked 6 Times in 6 Posts

    Re: A collection of TS Members Projects

    Quote Originally Posted by Retromotorsport View Post
    MK1/2 ESCORT SHELL PREP PRICES


    how much for everything in that photo fitted to a shell that requires no restoratory (sp) welding?
    i do not require a roll cage

    i also want the tarmac spec watts link that you do mate
    Last edited by sillymofo; 21-02-2011 at 02:44.

  6. #6
    Way too much free time Decade Plus User PIG's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    Oct 2004
    Location
    get me on my beeper,beeper
    Age
    55
    Posts
    11,882
    Thanks
    38
    Thanked 139 Times in 129 Posts

    Re: A collection of TS Members Projects

    call him mate or drop him a pm.gary will answer it

  7. #7
    Mechanic gringo!!'s Avatar

    Join Date
    Nov 2009
    Location
    Rotherham - in the shed
    Posts
    978
    Thanks
    147
    Thanked 49 Times in 48 Posts

    Re: A collection of TS Members Projects

    peeps...this mans work is simply awesome.........

  8. The Following User Says Thank You to gringo!! For This Useful Post:


  9. #8
    Mechanic

    Join Date
    Dec 2009
    Location
    Southern Ireland
    Age
    44
    Posts
    632
    Thanks
    35
    Thanked 13 Times in 13 Posts

    Re: A collection of TS Members Projects

    Quote Originally Posted by Retromotorsport View Post
    [

    Gary.... You're not really a sheet metal worker are you?





























    You're a fecking Artist! That's beautiful work . Simply beautiful.

  10. The Following User Says Thank You to Tristan For This Useful Post:


  11. #9
    Tyre Kicker

    Join Date
    Feb 2010
    Location
    City of Bradford, United Kingdom
    Age
    44
    Posts
    17
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: Retromotorsport Built Shells, plus Price List

    stunning looking work!

  12. The Following User Says Thank You to FASTdan For This Useful Post:


  13. #10
    Racer Decade Plus User alancdavis's Avatar

    Join Date
    Oct 2009
    Location
    cumbria
    Age
    69
    Posts
    2,477
    Thanks
    52
    Thanked 76 Times in 76 Posts

    Re: Retromotorsport Built Shells, plus Price List

    Price list is from 2010 so possibly risen a bit
    Big Wing sold and gone to be a film star

  14. #11
    Way too much free time Decade Plus User Retromotorsport's Avatar
    My Race Car
    Join Date
    Mar 2004
    Location
    Harlow, Essex
    Age
    55
    Posts
    14,285
    Thanks
    318
    Thanked 173 Times in 164 Posts

    Re: Retromotorsport Built Shells, plus Price List

    Quote Originally Posted by alancdavis View Post
    Price list is from 2010 so possibly risen a bit
    Nope..still the same

  15. #12
    Racer Decade Plus User alancdavis's Avatar

    Join Date
    Oct 2009
    Location
    cumbria
    Age
    69
    Posts
    2,477
    Thanks
    52
    Thanked 76 Times in 76 Posts

    Re: Retromotorsport Built Shells, plus Price List

    Well thats good news in a time every thing else is going up in price
    Big Wing sold and gone to be a film star

  16. The Following User Says Thank You to alancdavis For This Useful Post:


  17. #13
    Tyre Kicker

    Join Date
    Oct 2008
    Location
    west sussex
    Age
    39
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Gary Martin Motorsport (Retromotorsport) Builds and Prices

    finding it hard to get hold of retro motorsport. Number not working etc.
    Are you still trading?
    If so what are your contact details please......?

  18. #14
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,099
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: Gary Martin Motorsport (Retromotorsport) Builds and Prices

    i saw gary on saturday, he has moved premisis and a lot of stuff has been on the back burner due to his back issues, but he is deffinatly still trading

    you might be best off sending him a message on https://www.facebook.com/retromotorsport?fref=ts.

  19. #15
    Tyre Kicker

    Join Date
    Oct 2008
    Location
    west sussex
    Age
    39
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Gary Martin Motorsport (Retromotorsport) Builds and Prices

    Thanks mate. I'll give that a try

  20. #16
    Tyre Kicker

    Join Date
    Feb 2011
    Location
    Stoke
    Posts
    10
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Gary Martin Motorsport (Retromotorsport) Builds and Prices

    Hi all. I may well be getting a Mk1 Zackspeed rep chassis..W.O.W and want to use Gary. I need to speak to him first. I can't find a phone number and I don't have consent to pm although I've been on here 5 years. Someone put a number here, thanks Clay.

  21. #17
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,099
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: Gary Martin Motorsport (Retromotorsport) Builds and Prices

    Quote Originally Posted by CMH View Post
    Hi all. I may well be getting a Mk1 Zackspeed rep chassis..W.O.W and want to use Gary. I need to speak to him first. I can't find a phone number and I don't have consent to pm although I've been on here 5 years. Someone put a number here, thanks Clay.
    look for him on facebook

  22. #18
    Spanner Monkey MK1 madness's Avatar

    Join Date
    Apr 2013
    Location
    Here and There
    Age
    40
    Posts
    220
    Thanks
    37
    Thanked 7 Times in 6 Posts

    Re: Gary Martin Motorsport (Retromotorsport) Builds and Prices

    Quote Originally Posted by CMH View Post
    Hi all. I may well be getting a Mk1 Zackspeed rep chassis..W.O.W and want to use Gary. I need to speak to him first. I can't find a phone number and I don't have consent to pm although I've been on here 5 years. Someone put a number here, thanks Clay.
    Quite possible that the fact you have only made posts in 5 years means you can't PM.

  23. #19
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,099
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: Gary Martin Motorsport (Retromotorsport) Builds and Prices

    only 5 posts is exactly why he cant pm, you only actually need 10

  24. #20
    Spanner Monkey

    Join Date
    Oct 2001
    Location
    Shropshire
    Age
    51
    Posts
    239
    Thanks
    16
    Thanked 22 Times in 18 Posts

    Re: Gary Martin Motorsport (Retromotorsport) Builds and Prices

    Does anyone know if Gary is still doing fab and welding work ?

  25. #21
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,099
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: Gary Martin Motorsport (Retromotorsport) Builds and Prices

    yes he is, look him up on facebook

  26. The Following User Says Thank You to Graham For This Useful Post:


+ Reply to Thread

Similar Threads

  1. Mk1 Mexico & other projects....
    By evodave in forum Your Cars
    Replies: 10
    Last Post: 24-12-2007, 11:05
  2. hi guys one of my old projects for you
    By tony2000 in forum Restorations and Projects
    Replies: 11
    Last Post: 14-10-2005, 00:07
  3. how many projects do you have?
    By morcheen in forum General Car Banter
    Replies: 21
    Last Post: 19-11-2003, 16:14
  4. Projects
    By Clint in forum Message Centre
    Replies: 20
    Last Post: 03-01-2003, 11:24
  5. Another of Mr Hoarder's projects
    By 2quick4u in forum Restorations and Projects
    Replies: 3
    Last Post: 23-10-2001, 11:00

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts