I have a type 9 with Quaife H/D S/C synchro internals. Having done damage at a recent tarmac really (extreme bearing noise and almost no 3rd and 4th gears) i am pulling it down to check it out. I have a copy of the haynes manual and the Ford service manual for the type 9/N.
I have most of it apart but cannot separate the mainshaft from the intermediate housing. I have removed the large circlip and all bits on the mainshaft on the output side. Still have gears on the input side of the mainshaft. Neither manual give alot of help.
I assume the mainshaft will press out of the bearing? I don't have a press only a fbh. Am i missing something here?
Bookmarks