Pit Crew
C20XE megajolt map
Hi guys,
I just said id post this up and see what you guys think, and if any changes perhaps could or should be made.
To me it looks relatively safe, especially at higher rpm’s, and the RR operator stated the engine its running extremely well and strong, it made 157bhp at about 80% throttle due to a throttle stop breakage on the way to the rolling road I couldn’t fix on site.
So I’m very happy with the engine, it goes really well.
What do you guys think of the map?
Engine spec is as follows
Early c20xe completely rebuild to mostly oem spec and blueprinted
OEM mahle forged pistons
Coscast head, very mild porting ie port matching and casting deburr, tapered valve stems
Mahle rings
Rods deburred balanced and mildly polished
SBD oil pump
40mm bike carbs
Megajolt w/TPS
4-2-1 manifold
Std cams and timing
ARP’s
King race bearings
Balanced crank
-
Pit Crew
Re: C20XE megajolt map
anyone any opinions good bad indifferent?
-
Racer
Re: C20XE megajolt map
Looks good to me, would be good to see your AFR readings too, you might get away with slightly less advance at 1000rpm but if its working well....leave it alone.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks