More info on the cage -
Windscreen Pillar Reinforcement: For National Championship and National Series level Race, Rally and Off
Road competitions (and recommended in other competitions)
(i) A windscreen pillar reinforcement member shall be fitted on each side of the front roll bar if dimension “A” is
greater than 200mm (refer Drawing J-17).
(ii) The windscreen pillar reinforcement member may be bent on condition that it is straight in side view and
that the angle of the bend does not exceed 20°.
(iii) Its upper end shall be less than 100mm from the junction between the front (lateral) roll bar and the
longitudinal (transversal) member (refer Drawing J-62 for the measurement).
(iv) Its lower end shall be within 100mm of the front mounting foot (refer Drawing J-62 for the measurement). If
this reinforcement intersects the door bars, it must be split in several parts.
Attachment 80158
Bookmarks