Escort MK 1 two door N/A Cosworth project

[German MK 1]

Hi Guys,

as i have a little bit projects to much to get done in my life with family and house i think i will sell my Escort Mk 1 N/ACosworth project:



included are:
- complete Escort MK1 with V5 from 1971, left handed, 1,1L Engine in really good condition, as far as i can see no rust-holes, only on a few rust on the surface
- one Cosworth 205 Block (think stadard bore)

- one Cosworth 200 Block with a little crack between headbolt-hole and water-hole (standard bore)

- new polished cosworth crankshaft

- new Jenvey 48mm throtlle body
- Cosworth head complete built for Atmo use, solid lifters, valves, holbay camshafts, portet inlet and outlet ports, adjustable Vernier pulley and so on
- Cosworth camcover (horrible colour and two little holes on backside which has been used for ventilation which needs to get welded or used)
- Atlas Axle with original 16t diff.3,11 : 1
- new group 4 Fully Floating hub kit with group 4 and standard wheelbolts
- new group 4 flanges

- group 4 heavy duty halfshafts 18t

- new group 4four link kit heavy duty

- new group 4 watts linkage

-new aloy brace and clamps

- new AP-racing 21mm rear rotors

- new AP-racing fitting screws

- new rotor adapter plates for ap-discs on group 4 hubs

- new Bielstein coil overs

- new rear springs

- 2x Porsche Brembo rear calipers

- 2x Ford Sierra Cosworth 4x4 rear calipers

- new 2x carliper brackets cosworth 4x4

- 15” rear inner arch tubs set
- rear weld in turrets
- 4x Porsche Brembo calipers front

- Ford T9 bellhousing

- Cosworth clutch and flywheel machined for use with T9 Gearbox

- fitting starter
- light machine

- very rar front 7,5 alloy wheels

- very rar rear 9x15 alloy wheels



The second Cosworth engine and the T5 box in the pics is already sold and dosnt belong to this deal. No shipping.
I am looking for 16.500 pound for the lot, or realistic offers.

If there are any question, dont wait to contact me, I will answer soon. Will post more pics tomorrow.


Best regards from Germany,
Sebastian

[German MK 1]

Good morning,

i made a mistake with the Price. The 16.500,- should be Euro, so it must be round about 14.500,- pound.

If someone is interested in parts contact me, could make a engine package for the N/A Cosworth engine or an axle package or only the Car.
Just sent me a pm if you are interested in something, I am open for offers J
Sebastian

[Ruudje]

Private message send

[Ruudje]

.

[Mkdu]

Hi,
What is include in the cosworth engine package as you said one engine is sold.

[Twincam1212]

Hi would you consider selling the throttle bodies ?

[German MK 1]

Good Morning,
car and rear axle are no longer available.

Still for sale:

Cosworth 200 Block (standard bore) with tiny crack between water channel and headbolt:

1000,- € (about 870 pound) ono


Engine package consisting of:

- Brand new Jenvey Throttle Body
- Throttle Body Position sensor
- Full rail and 4 blue cosworth injection valves
- Cosworth Atmo Head with solit lifters, fully ported, holbay 445 camshafts, looks like fresh rebuilt as it absolutely clean valves and stillt assembly paste on the valve guides
- Cosworth 205 block (standard bore)
- new polished cosworth crankshaft 0.75 oversized
- pinto flywheel machined for use on cosworth crankshaft
- used clutch and plate
- Camcover (two holes on backside)

5200,- € (about 4500 pound) ono

Kind regards
Sebastian

[German MK 1]

As it is no longer a Car for sale i will open new thread in parts for sale for the engines

Twincam1212 you get a pm for the throttle bodies

Sebastian

[Miniliteman]

Private message send

You bought the car Ruud?

[Ruudje]

You bought the car Ruud?

Nope

[Robert 1]

How much for the throttle bodies ?