p9cyo plates

[paddycresta]

Hi guys ,has any body had any dealings with p9cyo plates ?I ordered a conversion plate for an rx8 box to 1.8 zetec on the 20th feb and have not received it yet,tried calling and texting and email, but there in no reply,anyone know what the story is?

[Ianbavs]

Should of used Freddys plate fella


Sent from my iPhone using Tapatalk

[paddycresta]

do you have a number or have they a web site?

[Ianbavs]

He's on here freddy686868


Sent from my iPhone using Tapatalk

[Graham]

he also has a FB page https://www.facebook.com/search/top/...aptor%20plates

[freddy686868]

do you have a number or have they a web site?

Hi, sorry to hear psycho plates has ripped another person off. I will drop you a message now if you want to sort out a proper plate that you will recieved. Thanks, john.

[RitchieMk1]

Hi Gents, I have the same issue, ordered and paid on the 30th March with a confirmation email that my order was ready but I haven't seen anything since. It's not looking good. Tried calling but no answer.
Freddy, I may need a plate from yourself aswell, Zetec to RX8.

[freddy686868]

Hi Gents, I have the same issue, ordered and paid on the 30th March with a confirmation email that my order was ready but I haven't seen anything since. It's not looking good. Tried calling but no answer.
Freddy, I may need a plate from yourself aswell, Zetec to RX8.

give me a call some time if you like 07903724837. we can sort you out with one. I'm sorry to say but i doubt you will get your cash back unless you threaten to round to his address. hope that helps.

[5tox]

I remember reading up ages ago about this guy ripping people off, how is he still managing to get away with it?

[davemk1]

Apart from possibly losing your money your not missing out on much.
I bought one of p9scyo ones and let's just say it's not the best fit!
I had to weld up and re-drill several holes which were half a hole out! The starter motor had no positive location so slopped about and these holes were also out which jammed it against the flywheel.
I've only heard positive comments about Freddy's ones.
good luck

[freddy686868]

Apart from possibly losing your money your not missing out on much.
I bought one of p9scyo ones and let's just say it's not the best fit!
I had to weld up and re-drill several holes which were half a hole out! The starter motor had no positive location so slopped about and these holes were also out which jammed it against the flywheel.
I've only heard positive comments about Freddy's ones.
good luck

thanks dave it is a shame that psycho plates is still ripping people off though, to the point where he isn't even bothering to send the rubbish out in the first place.

[Dainius]

Oh ffs... I found this thread only after paying this guy, and he is not answering phone

[freddy686868]

Oh ffs... I found this thread only after paying this guy, and he is not answering phone

o dear really sorry to hesar this you should get on to the bank and tell them. I'm sure they have had lots of complains about him.

if you need advice on the conversion or an adapter let me know

https://www.facebook.com/groups/1779024555682316/

[Dainius]

Unfortunately you're not making Duratec to RX8 plate.

[freddy686868]

Unfortunately you're not making Duratec to RX8 plate.

give me a month to 6 weeks

[Dainius]

How much would it cost? What can I do to speed it up?

[freddy686868]

How much would it cost? What can I do to speed it up?

i'm struggling to find a block and crank at the moment to mock it up and the adapters are norm,ally around £125-£145 with free postage with in the uk