TURBOSPORT.CO.UK Stickers have arrived
Colours Available: BLACK WHITE SILVER RED BLUE
Logo Sizes (approx) ____________ Prices
800mm x 130mm ________________ £12
600mm x 100mm _________________ £9
400mm x 65mm __________________ £7
200mm x 35mm __________________ £4
Sunstrips (blank backings) _________ £12
avaliable in Black and White
Custom colours available on request (PRICE ON APPLICATION)
* * * POST AND PACKING £1.50 * * *
(UK ONLY, OVERSEAS P.O.A)
400 white logo
400 white logo on black sunstrip
---------------------------------------------------------------------------------------------------
Dancing Banana Stickers
100mm x 80mm approx ____________________ £2
Free to subscribers and attendees of shows and events
Members banana available to subscribers from Jan 2008
For just £12 per year you can subscribe, click here Find out about events and shows Turbosport will be attending click here
** ALL SALES CONTRIBUTE TO THE RUNNING AND MAINTENANCE OF THE SITE ** PLEASE SUPPORT BY ADDING A TURBOSPORT STICKER TO YOUR CAR, BIKE, CARAVAN, PUSHBIKE... HOUSE 
Examples:
HOW TO ORDER
PLEASE STATE THE SIZE, COLOUR AND BACKROUND (SUNSTRIP) COLOUR IN A PM TO RETROMOTORSPORT
ADD UP HOW MUCH YOU NEED TO SEND TO THE LINK BELOW AND SEND PAYMENT, WHEN THE PAYMENTS RECEIVED YOUR PM WILL BE REPLIED TO WITH
"PROCESSING PLEASE ALLOW 2 WEEKS FOR DELIVERY "
PLEASE POST A PICTURE ON THE THREAD ONCE YOU HAVE APPLIED THEM
=================================
EXAMPLE
CAN I HAVE THE FOLLOWING
1 X 800 IN RED
1X WHITE SUNSTRIP
2X 200 IN RED
1 BANANA
TOTAL £35.50
MY ADDRESS FOR POSTING IS
A TS MEMBER
4 CYLINDER CLOSE
MOTORTOWN
A COUNTY
CO5 5IE
================================
PLEASE DO NOT POST YOUR ADDRESS ON THE FORUM
AND THANK YOU FOR ORDERING AND HELPING
TURBOSPORT
HOW TO APPLY YOUR STICKERS TOOLS NEEDED
EMPTY TRIGGER SPRAY
FILL THIS WITH WATER AND 2 DROPS OF WASHING UP LIQUID
CRAFT KNIFE
(MUST BE SHARP/NEW)
A CREDIT CARD
CLOTH
HOUSEHOLD GLASS CLEANER
TAPE MEASURE AND MASKING TAPE
A FRIEND TO HELP
========================================
CLEAN THE GLASS THOROUGHLY WITH THE HOUSEHOLD GLASS CLEANER
LAY THE SUNSTRIP ON THE SCREEN AND CHECK FOR HEIGHT, MEASURE AND MARK WITH THE TAPE ON BOTH SIDES
PEEL THE BACKING OFF THE SUNSTRIP AND WET AS YOU PEEL WITH THE SOLUTION IN THE TRIGGER SPRAY
WITH YOUR HELPER LAY THE SUNSTRIP ON THE SCREEN MAKING SURE IT COVERS THE RUBBER AT THE TOP OF THE SCREEN AND IS ALIGNED WITH THE TAPE
WRAP THE CREDIT CARD IN A CLOTH AND SQUEEGEE EXCESS WATER FROM BELOW THE SUNSTRIP, START AT THE MIDDLE AND WORK OUTWARDS, CHECKING THE ALIGNMENT ALL THE TIME, KEEP WORKING THE WATER OUT FROM THE SUNSTRIP
WORK THE CLOTH COVERED CREDIT CARD INTO THE EDGES, SQUEEZING OUT WATER AND PUSHING THE VINYL INTO THE JOIN BETWEEN SCREEN AND SCREEN RUBBER
REMOVE THE CLOTH FROM THE CREDIT CARD AND PUSH THE VINYL INTO PLACE, THE NEATER YOU CAN GET THE VINYL AT THIS POINT THE BETTER IT IS FOR THE NEXT STAGE
GENTLY PUSH THE VERY SHARP BLADE INTO THE VINYL AT THE SCREEN AND RUBBER JOIN AND DRAW ALONG, TAKE YOUR TIME , THE BLADE SHOULD FOLLOW THE SCREEN JOIN EASILY IF ITS SHARP
FINALLY RUN ROUND THE EDGES WITH THE CLOTH, THIS SHOULD SEAL THE EDGE DOWN, IT MAY STILL BE A LITTLE MOIST BUT DONT WORRY JUST USE THE SQUEEGEE AGAIN AND THEN THE CLOTH, REMEMBER THOUGH, BE GENTLE
LEAVE THIS FOR A WHILE AND THEN COME BACK TO IT TO CHECK THE EDGES , PUSH DOWN FIRMLY WITH THE CLOTH ON THE EDGES IF THERE'S ANY LIFTING, YOU NOW HAVE THE BASE FOR THE NEXT STAGE.
THE LOGO
WRAP THE CREDIT CARD IN THE CLOTH AGAIN AND RUN OVER THE TOP OF THE LOGO, THIS PUSHES THE LOGO ONTO THE BACKING STRIP BETTER, THEN SLOWLY PEEL IT AWAY AS SHOWN
GENTLY FOLD IN HALF AND PINCH THE TOP EDGE AND BOTTOM EDGE, JUST TO MARK THE BACKING, DONT FOLD ALL THE WAY UP, JUST THE VERY EDGE
MARK THE CENTER OF THE SCREEN WITH A BIT OF TAPE AND THEN SPRAY THE AREA THE STICKER IS GOING WITH A LIGHT SPRAY, DONT SOAK IT YOU JUST WANT A THIN FILM OF WATER ON THE SCREEN LIKE MIST.
LAY THE STICKER DOWN ON THIS AND ALIGN WITH THE TAPE, MAKE SURE ITS LEVEL AND SQUARE.
THEN GENTLEY SQUEEGE OUT THE WATER, AGAIN FROM THE CENTER AS SHOWN
AS THE WATER IS SQUEEZED OUT APPLY FIRMER PRESSURE
WAIT A WHILE AND THEN GENTLY PEEL THE BACKING AWAY AS SHOWN. KEEP A CLOSE WATCH ON THE LETTERS AS YOU PEEL IF ONE LIFTS THEN LAY THE BACKING BACK DOWN ON THE LETTER AND RUB WITH YOUR FINGER, THEN START PULLING AGAIN UNTIL ITS FULLY REMOVED
IN WINTER OR COLD GARAGES IT WILL TAKE LONGER FOR THE STICKERS TO STICK, AND IN THE SUMMER, THINGS CAN GET STUCK REALLY QUICKLY.
WHEN ITS COLD IT BEST IF YOU CAN LEAVE THE CAR OVER NIGHT BEFORE USING IT
JOBS JOBBED
100mm x 80mm approx ____________________ £2
Gary
Reply With Quote
just trying to be a smart arse! 
Originally Posted by Tigerpig 
Bookmarks