Escort Mk1 Lower door repair panel

[Cyco]

Surplus to requirement (as I had three made).
Lower repair panel to suit a MK1 escort door, including the drain holes in the orginal place made from 1.2mm mild steel.

Not the easiest thing to take a photo of but see below.

£14.00

[Cyco]

And another!
This allows for the bottom of the door (the part that normally rusts) to be cut out and replaced with something that looks original with the drain holes.
Saved both my door frames using these prior to fitting new skins ( well Trig fitted the skins)

Cheers

[Cyco]

Sold pending payment.


Cheers

[alladdin]

do you have any drawings made for these ? would be usefull.

[trig]

These are one of the best repair panels ive seen Cyco get your ass down there and make a boat load of them mate.

[Cyco]

I can get some more made if anyone requires any.

Let me know if interested.

Cheers

[alladdin]

i would be lower door skin to match would be handy as well

[Cyco]

Hi yes I can get some more made.
Do you require one or two? they are not sided!

[Pushrod King]

Hope they're better than the doors you sold me

[Cyco]

Hope they're better than the doors you sold me

Mate instead of bitching on here about it pick up the phone and talk.

Here is some of the e-mail traffic prior to you buying the doors over the phone without even viewing them so lets not pretent you didn't know what you are buying:

Hi Cye,
I've lost your 'phone number so apologies for doing this by email,from memory you said that you'd be happy to weigh them for me? How much do they weigh?
I'd have to pay for them to be repaired and prepared etc is the damage all the way through to the outer skin? Is the gel coat sound?.
I am still very interested but as you say it's hard buying stuff from photos.
TBH I'm tempted to let you repair/prep them.

Speak soon,
Nick

,Cye" Cyco@---.com wrote:

Ok Nick, they look alot worse on the photos to be honest but I made sure that the photos did cover all the damage to them as i did not want to fool you and have you dissapointed.

If you prefer I can get them rubbed back with the DA and take some other pictures.

Not moving on the price tho, would rather repair the doors this end and put them up for £200.

No problem if you don't want them fully understand trying to buy something from photos.

Cheers

From: Pushrod King [mailto:-------@btinternet.com]
Sent: 16 November 2007 17:53
To: Cyco
Subject: Re: Door photos

Thanks for the pics Cye,
they do need some work don't they! TBH I'm not sure if they're worth what I originally offered,I'll have to give it some thought.
Nick (pushrod King)

I prefer not to air my laundary on a public forum but as you insist on making this seem very one sided!

Oh and drop the that don't mean shit to me.

[Pushrod King]

I did this as a last resort,thought I might get a reaction,I emailed and messaged you but got no response! I haven't got your number so can't call.
Obviously different people have different ideas when it comes to describing stuff. I can post pictures up if you like? As for it was meant to be tongue in cheek and should really of been

[farmerwaffle]

hey Cyco, just wandering are you still making these repair panels? if so how much are you asking for a pair?

[Stringpants]

I would be interested in one too

Russ.

[evodave]

I would be interested in one too

Russ.

I'd be interested in a few too if you'll do them....

[alladdin]

cyco has made the drawing available to get them made, in a post of his with lots of drawings.

im up for a pair.

[Cyco]

I have had a couple of PM's asking for these to be done, unfirtunately the Fab shop I use are very busy at the mo.
I will be able to get some done people just might have to wait a couple of weeks for them.

I will get a batch of 20 done.
So please put your name down for a set if you needs them.

[alladdin]

set for me please

[dodgyknee]

hi i would defo want 2 of them cheers

[rsminter]

i might be up for two of these as well,i will get to my garage this week and have a look at my doors and get back to you.

[mk1yorkie]

put me down for one

[Bigfish]

Hi

I'll have a pair as well

Thanks

[evodave]

cyco has made the drawing available to get them made, in a post of his with lots of drawings.

im up for a pair.

Which post was the drawing on ? I hadf a look through them all earlier & I cant find any mention of drawing s ?

Cheers,
David

[alladdin]

in first batch
http://www.turbosport.co.uk/showthre...hlight=drawing

[Mr Day]

I'd poss be after a pair to,will have to check my doors 1st though and see how bad they are??

[Cyco]

Bloody hell just a few then

They should be going through on Friday of this week
I will keep people posted.

[Ratters]

a pair for me too please bud

[alladdin]

cyco, maybe you should draw up a lower outer skin repair as well ?

[Alan G]

cyco, maybe you should draw up a lower outer skin repair as well ?

+1

[Khyle]

I would like a pair 100% Thank you!

[binksy73]

Hi can you put me down for a pair of the lower repair panels please. Also for a pair of the lower outer skins as well if you do them.
Regards Steve.

[farmerwaffle]

how much would a pair or lower repair panels set me back? and one lower outer skin if you do them aswell?
cheers, Will

[Cyco]

20 are sat ready to go I need some delivery addresses, please PM me.
Think I need to get another 10 done!
If I do the outer skin how far up do people want it? Just below the swage line?

[Cyco]

Prices are £25 a pair or £14 each.

[Alan G]

20 are sat ready to go I need some delivery addresses, please PM me.
Think I need to get another 10 done!
If I do the outer skin how far up do people want it? Just below the swage line?

I'd be interested in a pair of the outer skins....

[alladdin]

me too and pm sent

[span style="color: black;">bargy]

i did this as a last resort,thought i might get a reaction,i emailed and messaged you but got no response! I haven't got your number so can't call.
Obviously different people have different ideas when it comes to describing stuff. I can post pictures up if you like? As for It was meant to be tongue in cheek and should really of been

prick

[Bigfish]

Pm sent
Cheers

[dodgyknee]

Pm sent cheers

[binksy73]

Hi is there any of the repair panels left? I wanted the lower inner & outer panels to do both doors.
Regards Steve.

[Ratters]

bugger forgot to get these off you at the track day mate

i will have a pair though - 100%