Type 9 Gearbox Cross Member Mounting
Hi Everyone,
I am now at the stage of mounting my type 9 gearbox crossmember, the plan being to bolt it through the floor.
I have a sierra crossmember, however it looks like I need to make a lowering block of around 30mm to get clearance between bottom of the gearstick housing and body. Has anyone had to do this before?
Many thanks,
Jamie
-
World Champion
Re: Type 9 Gearbox Cross Member Mounting
Yes they sell gearbox lowering blocks as its a common problem.
'68 1100 Deluxe-bog stock soon to be a twincam rep.
The Following User Says Thank You to meXEco For This Useful Post:
Racer
Re: Type 9 Gearbox Cross Member Mounting
yep, when i did this i used a capri cross member and bolted through the floor. I had to make up some spacers, luckily and old sunbed stand provided some useful rectangular section steel for the job. you could probably buy some alloy pieces of ebay that would do the job.
The Following User Says Thank You to wildo105e For This Useful Post:
Re: Type 9 Gearbox Cross Member Mounting
Champion, thanks for the info. I have bought some aluminium flat on ebay for £10.00 which should do nicely.
I love the fact you used that off a sunbed haha!
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks