this is on L8, have anybody found more info about protocol? like lambda correction or error bytes decoding?
Hi
I have a P8 Ecu with 14-16 SW and a KKL 409.1 Adapter. I make a cable to connect the ecu pin 8 to OBD 15, Ecu 27 to OBD 7 and 2 cables for Gnd & Ign.
But i have no connection with Tunerpro and Lancia Adx file.
How are the settings for comms? Baudrate?
Have you more Info about?
Thank you
Hi Guys I have a Escort P8 with a chip from a unknown tuner. its min 20 yaers or older. (the car goes fine)
i have try to read out the datastream, but its a mistery:
Baudrate 1952-- no answer
Baudrate 7812-- no answer
Baudrate 9600 with pectel code (80h, 81h....) no answer.
Baudrate 9600-- it will answer, on 01h to 40h. i have it tested, but the calculation from the fiat doc is wrong.
Calculation from Pectel its also wrong.
As example:
Battery voltage 13V: send 10h, request 128dec *0.0628 = 8.04V
If i change voltage to 12V, the answer is still 128dec...
is there a 3rd party datastream? anyone know more about?
Bookmarks