No spark

[wattersss1]

Right so guys

I'm using h&h coil and dizzy
With twin carb set up on 1600 xflow non vacuum

Not getting a spark only when I turn the key for a second and then nothing
Done all the usually checked
rotor arm
Cap
Leads
Ballast removed
Getting 12v
Changed coil
And module
Getting power at coil and spark
So it's somewhere in dizzy even changed module

Should I just change my set up any recommendations



Anyone



Sent from my iPhone using Tapatalk

[Miniliteman]

Difficult to diagnose from behind a keyboard.
Guess you have removed and bypassed the ballast-resistor?
And timed the distributor?

[andyf1140]

I once had a problem where the plate that the points are attached to wasn't earthed reliably which resulted in an intermittent spark.