User Tag List

+ Reply to Thread
Results 1 to 4 of 4

Thread: X/flow twin carb 12.5 degree manilfold

  1. #1
    Tyre Kicker

    Join Date
    May 2016
    Location
    Australia
    Age
    37
    Posts
    34
    Thanks
    1
    Thanked 0 Times in 0 Posts

    X/flow twin carb 12.5 degree manilfold

    After a twin Weber 40 manifold for x/flow with the steeper angle to try and retain the brake servo at a lower height. I'm in Australia but happy to pay for postage ect. Anyone help!?

  2. #2
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,110
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: X/flow twin carb 12.5 degree manilfold

    1300 manifolds had a steeper angle than 1600 to cater for the shorter 1300 block, but you should be able to lower the servo enough to use a 1600 manifold

  3. #3
    Tyre Kicker

    Join Date
    May 2016
    Location
    Australia
    Age
    37
    Posts
    34
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Re: X/flow twin carb 12.5 degree manilfold

    Using a 10 degree angled one for 1600? Cheers for the reply

  4. #4
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,110
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: X/flow twin carb 12.5 degree manilfold

    yes we used to do it loads, 1600 manifold and move the servo down, K +n air filters were still a tight fit though

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts