User Tag List

+ Reply to Thread
Results 1 to 6 of 6

Thread: How is PCV valve connected? Escort mk2 RS2000

  1. #1
    Spanner Monkey Ruudje's Avatar

    My 1st Project
    Join Date
    Dec 2009
    Location
    Netherlands
    Age
    40
    Posts
    413
    Thanks
    19
    Thanked 26 Times in 26 Posts

    How is PCV valve connected? Escort mk2 RS2000

    hi,

    I am rebuilding my mk2 RS2000 back to original spec.
    Does anyone know where to and how the PCV valve is connected?
    Looking for originality so no catch tanks allowed

    A photo would be even better

    regards,
    Ruud

  2. #2
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,110
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: How is PCV valve connected? Escort mk2 RS2000

    sorry dont have any pics but its connected to an elbow on the intake manifold

  3. #3
    Pole Position Decade Plus User
    Turbosport Administrator
    Miniliteman's Avatar

    Join Date
    Feb 2004
    Location
    the Netherlands
    Posts
    4,888
    Thanks
    38
    Thanked 611 Times in 558 Posts

    Re: How is PCV valve connected? Escort mk2 RS2000

    Click image for larger version Name:	a591328-19072007141.jpg Views:	59 Size:	62.5 KB ID:	81458

  4. #4
    World Champion Decade Plus User alladdin's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    May 2005
    Location
    s.wales
    Age
    60
    Posts
    9,200
    Thanks
    167
    Thanked 446 Times in 432 Posts

    How is PCV valve connected? Escort mk2 RS2000

    Pic looks odd ? Generally the large separator plugs into block and the Valve plugs in to that (on end of pipe)
    Or the same setup but large unit replaced by a small barrel again wedged in block. I may be wrong but I don't remember the above setup with large unit into a smaller adapter.


    Sent from my iPhone using Tapatalk

  5. #5
    Spanner Monkey

    Join Date
    Jan 2016
    Location
    Hull
    Posts
    246
    Thanks
    5
    Thanked 24 Times in 24 Posts

    Re: How is PCV valve connected? Escort mk2 RS2000

    Aladdin is correct the breather box is direct into block (push fit) some may also have a m6 bolt or 1/4 unc as a secondary means of holding the box to the block. The PCV valve is in the end of a moulded pipe pushed into the large rubber ring on top of box then to an elbow on inlet manifold.

  6. #6
    Pole Position Decade Plus User
    Turbosport Administrator
    Miniliteman's Avatar

    Join Date
    Feb 2004
    Location
    the Netherlands
    Posts
    4,888
    Thanks
    38
    Thanked 611 Times in 558 Posts

    Re: How is PCV valve connected? Escort mk2 RS2000

    You are right ofcourse should have looked better at the photo before posting ...

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts