Spanner Monkey
How is PCV valve connected? Escort mk2 RS2000
hi,
I am rebuilding my mk2 RS2000 back to original spec.
Does anyone know where to and how the PCV valve is connected?
Looking for originality so no catch tanks allowed
A photo would be even better
regards,
Ruud
-
Re: How is PCV valve connected? Escort mk2 RS2000
sorry dont have any pics but its connected to an elbow on the intake manifold
-
Re: How is PCV valve connected? Escort mk2 RS2000
-
World Champion
How is PCV valve connected? Escort mk2 RS2000
Pic looks odd ? Generally the large separator plugs into block and the Valve plugs in to that (on end of pipe)
Or the same setup but large unit replaced by a small barrel again wedged in block. I may be wrong but I don't remember the above setup with large unit into a smaller adapter.
Sent from my iPhone using Tapatalk
-
Re: How is PCV valve connected? Escort mk2 RS2000
Aladdin is correct the breather box is direct into block (push fit) some may also have a m6 bolt or 1/4 unc as a secondary means of holding the box to the block. The PCV valve is in the end of a moulded pipe pushed into the large rubber ring on top of box then to an elbow on inlet manifold.
-
Re: How is PCV valve connected? Escort mk2 RS2000
You are right ofcourse should have looked better at the photo before posting ...
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks