Duratec 2.0l on Webers Coil Pack Lead Configuration
Guys been using EFI for several years with Coil over plugs however the latest build is on Webers. The car runs fine on idle but drives shocking. I think the Spark Plug lead configuration is incorrect. I know the Firing Order from Front to Rear is 1.3.4.2
Their appears to be so many different Coils for the DURATEC. I have a Bosch one fitted with the Outlets marked from 1-4. Should I rely on the numbers stamped into the Coil or should I look at something else.?
Any help much appreciated
-
World Champion
Duratec 2.0l on Webers Coil Pack Lead Configuration
If your using wasted spark then 1-4 ,2-3 fire together anyway.
Depending what's driving the coil pack you can wire the 2 coils backwards but in either case if sure that idle would be on 2 or 3 cyl.
Sent from my iPhone using Tapatalk
-
Re: Duratec 2.0l on Webers Coil Pack Lead Configuration
Thank you it's using an MBE Ignition only ECU
-
Racer
Re: Duratec 2.0l on Webers Coil Pack Lead Configuration
If it idles i would be looking more at the carbs. If you take a lead off and idles worse you know that it was ok in the first place.
The Following User Says Thank You to wildo105e For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks