User Tag List

+ Reply to Thread
Results 1 to 6 of 6

Thread: Cosworth P8 WASTE SPARK / DISS solution

  1. #1
    Bodger

    Join Date
    Jun 2012
    Location
    Slovakia
    Posts
    50
    Thanks
    0
    Thanked 1 Time in 1 Post

    Cosworth P8 WASTE SPARK / DISS solution

    So guys,

    who wants to have WASTE SPARK, DISS..without any HW mods inside ECU? only software change inside bin file, and of course you need to wire 2nd ignition output from ECU, new amplifier...etc

    Solution is for FREE!!!!

  2. #2
    Tyre Kicker

    Join Date
    Jul 2016
    Location
    Spain
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Cosworth P8 WASTE SPARK / DISS solution

    I would like to know how to activate this one

  3. #3
    Management Team Decade Plus User
    Turbosport Subscriber
    Turbosport Moderator
    Clint's Avatar
    My Race Car
    My 1st Project
    My 2nd Project
    My 3rd Project
    Join Date
    Jul 2001
    Location
    Sevenoaks, Kent, United Kingdom
    Age
    54
    Posts
    925,564
    Thanks
    59
    Thanked 279 Times in 179 Posts

    Re: Cosworth P8 WASTE SPARK / DISS solution

    You need to either use Fiat software or hacked Pectel software, post the solution in this forum here: http://www.turbosport.co.uk/forumdisplay.php?f=248
    Cosworth Electronics / Pectel Dealer, Syvecs Dealer.
    Europes Largest Link ECU Dealer - Aim Sportline Dash and Datalogger Dealer, ECU Master for South East UK
    UK Mahle and Reinz Distributor - 3J Driveline Dealer - Corbeau Seat Dealer
    ECU & Dash packages preconfigured and custom looms made to order.
    Professional conversions - Engine Swaps - Complete Project Design
    0% Finance Available on all products and services.
    [B]Engine Parts for most makes, all Ford parts kept in stock, Pinto, Xflow, YB, V4, V6, Zetec, Dratec, Wiring Looms Plugs, Plug Kits and Loom Products, Head Refurbishment and Porting, Engine Rebuilding Services.
    w: www.shopbhp.com e: sales@shopbhp.com
    Like us on Facebook: https://www.facebook.com/brandshatchperformance

  4. #4
    Pit Crew Decade Plus User

    Join Date
    Mar 2008
    Location
    west bromwich
    Posts
    1,861
    Thanks
    3
    Thanked 141 Times in 135 Posts

    Re: Cosworth P8 WASTE SPARK / DISS solution

    And me

  5. #5
    Bodger

    Join Date
    Jun 2012
    Location
    Slovakia
    Posts
    50
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: Cosworth P8 WASTE SPARK / DISS solution

    send PM with mail, send bin files..I will enable DISS free...

  6. #6
    Bodger

    Join Date
    Jun 2012
    Location
    Slovakia
    Posts
    50
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: Cosworth P8 WASTE SPARK / DISS solution

    To Enable WASTE SPARK, DISS in EVERY P8 ECU software (Fiat, Lancia, Ford)

    Find address 07DF in hexeditor (or 87DF with offset)Default value at this place is "64" (hex mode) = this value 64 means "0" for ECU.

    ECU code has option for selecting Ignition driver mode (with distributor or without) so "64" = with distributor. Change this value to A0 or B0 = without distributor ...think its not very important (just higher than 64)(try and report)
    Now ECU will use 2nd spark output on PIN 26.

    In this setup you need to rewire your ignition system:

    PIN 24 - ignition ground
    PIN 25 - Ignition trigger for 2/3 cyls
    PIN 26 - Ignition trigger for 1/4 cyls

    You need to buy Ford EDIS 2x2 coil and another Ignition amplifier. Ground is same for both amplifier, just triggers on PIN 6 (amplifier) are differend (first amp is from ECU 25, second from 26)

    at last, dont forget to disable checksum controll (or calculate new checksum).
    Last edited by midnightman; 04-11-2017 at 17:53.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts