So guys,
who wants to have WASTE SPARK, DISS..without any HW mods inside ECU? only software change inside bin file, and of course you need to wire 2nd ignition output from ECU, new amplifier...etc
Solution is for FREE!!!!
So guys,
who wants to have WASTE SPARK, DISS..without any HW mods inside ECU? only software change inside bin file, and of course you need to wire 2nd ignition output from ECU, new amplifier...etc
Solution is for FREE!!!!
I would like to know how to activate this one
You need to either use Fiat software or hacked Pectel software, post the solution in this forum here: http://www.turbosport.co.uk/forumdisplay.php?f=248
Cosworth Electronics / Pectel Dealer, Syvecs Dealer.
Europes Largest Link ECU Dealer - Aim Sportline Dash and Datalogger Dealer, ECU Master for South East UK
UK Mahle and Reinz Distributor - 3J Driveline Dealer - Corbeau Seat Dealer
ECU & Dash packages preconfigured and custom looms made to order.
Professional conversions - Engine Swaps - Complete Project Design
0% Finance Available on all products and services.
[B]Engine Parts for most makes, all Ford parts kept in stock, Pinto, Xflow, YB, V4, V6, Zetec, Dratec, Wiring Looms Plugs, Plug Kits and Loom Products, Head Refurbishment and Porting, Engine Rebuilding Services.
w: www.shopbhp.com e: sales@shopbhp.com
Like us on Facebook: https://www.facebook.com/brandshatchperformance
And me
send PM with mail, send bin files..I will enable DISS free...
To Enable WASTE SPARK, DISS in EVERY P8 ECU software (Fiat, Lancia, Ford)
Find address 07DF in hexeditor (or 87DF with offset)Default value at this place is "64" (hex mode) = this value 64 means "0" for ECU.
ECU code has option for selecting Ignition driver mode (with distributor or without) so "64" = with distributor. Change this value to A0 or B0 = without distributor ...think its not very important (just higher than 64)(try and report)
Now ECU will use 2nd spark output on PIN 26.
In this setup you need to rewire your ignition system:
PIN 24 - ignition ground
PIN 25 - Ignition trigger for 2/3 cyls
PIN 26 - Ignition trigger for 1/4 cyls
You need to buy Ford EDIS 2x2 coil and another Ignition amplifier. Ground is same for both amplifier, just triggers on PIN 6 (amplifier) are differend (first amp is from ECU 25, second from 26)
at last, dont forget to disable checksum controll (or calculate new checksum).
Last edited by midnightman; 04-11-2017 at 17:53.
Bookmarks