As title says just wondering how those of you in the know have mounted/ modified your fuel rail when using a 10mm inlet spacer on a YB? Any pics would be handy. KooThanks in advance
As title says just wondering how those of you in the know have mounted/ modified your fuel rail when using a 10mm inlet spacer on a YB? Any pics would be handy. KooThanks in advance
Anyone?
Hi Kizza, the fuel rail simply bolts onto the other side of the two mounting posts as the posts are 10mm wide.
Cheers Duffer ill have another suss of it. Didnt seem to wanna line up for me for some reason. Thanks
Last edited by wildo105e; 06-10-2017 at 22:28.
Too easy. Thanks fellas. Much appreciated
the last above pic shows standard, when you add the spacer it will sit on the spacer rather than the plenum now ?? maybe it needs a slot filing in the give space for the bracket.
I have just looked at the spacers on ebay. If the mounting post is 10mm thick it will be as duffer says, it will just sit on the other side of the mounting post. the spacer shouldn't encroach on the post.
Just a follow up for those interested. I tried putting the fuel rail on the back of the mounts but it didnt sit right and the injectors were at an angle. So I ground down the back of the mounts on the plenum about 3mm and it fits a treat. Thanks again
i had another look on ebay maybe a 14mm spacer would have been easier
Yeah 14mm would have been way easier. I bought the 10mm one years ago and finally decided to pull my finger out and get this conversion done!
Bookmarks