steel front bubble arch help
hi all
new to forum been searching for info on front steel bubble arch fitment
the ones i have has the bumper bar mounting bit where the side bolts go thru on it
now do i cut the front wing bar bolt up holes out and use the one on the steel bubble arch or cut it off the steel bubble arch and leave the wing mounting holes on
i see different pics where it looks like they have cut them out and use the bubble arch holes to mount bar , and also seem others that have cut the bar holes of the steel arch and use the original wing holes ... bit confused as which way is right
cheers
-
Pit Crew
Re: steel front bubble arch help
Dont think its really going to matter which way round you do it mate, i did mine like this
09.03 (1).jpg
-
Mechanic
Re: steel front bubble arch help
I left my original bumper hole. Mine are fitted on the inside of the wings.
-
Tyre Kicker
-
Re: steel front bubble arch help
-
Re: steel front bubble arch help
I left the original bumper hole too, just cut the arch around the recess.
-
Re: steel front bubble arch help
cheers after looking at it and measuring etc i decided to leave original bumper hole as well..
a panel beater friend told me instead of using a joggler on the panels to do it to the arches and weld them up so in the end result , the cut panels sits flush with the arch and not much filler needed just finished the 4 arches
-
Mechanic
Re: steel front bubble arch help
-
Re: steel front bubble arch help
Originally Posted by
beeRS Nice job!
cheers still need some finish off work on them and cut the excess out
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks