Looking for a standard cosworth yb cossie crank with standard journal sizes. Might be interested if it needs a regrind though. Please post photos and prices below. Thanks guys, John.
Looking for a standard cosworth yb cossie crank with standard journal sizes. Might be interested if it needs a regrind though. Please post photos and prices below. Thanks guys, John.
Bump
I have one which i bought on standard grinds (so i was told), I am away until tomorrow and can dig it out to measure, if my verniers get around the journels etc. I am no longer going down the cosworth route so is surplus to my needs now.
Is it just the crank you need ?
I have measured the journals and it seems to fit in with dims below, but i only have mm verniers I so got 57mm and 52mm. I bought it a few years off turbosport as standard so have no reason to disbelieve given the above. The marks on a couple of journals may polish or it may need a grind I have never had it checked yet as i never got to engine build stage. On some pics there are lines which is the flash on my phone reflecting
STD: 56.975 to 56.969
Big end bearing journal:
STD: 51.993 to 51.977
Pm'd you thanks.
Bookmarks