Hi,
Do you have the one (arb from whiteline) for the rear too?
If yes Could you put fotos of it, I'm curious.
I follow your thread with attention, I will built a Cosworth V6 1973 Taunus. so lot of interesting thing in your project.
Hi,
Do you have the one (arb from whiteline) for the rear too?
If yes Could you put fotos of it, I'm curious.
I follow your thread with attention, I will built a Cosworth V6 1973 Taunus. so lot of interesting thing in your project.
Don't Scrap it, Restore it !
I have it yes, but it doesn't fit with those rear upper arms. And it looks fairly to say, peace of crap! Front swaybar is spot on, but rear one isn't. Atleast, that's my opinion. Couldn't find a pic of it.
But it basically bolt's to the rear axle with u-bolts and under the original rear upper arms connecting bolts in the chassis. I would recommend to you original cortina rear swaybar, if you have original rear axle. That didn't fit with this volvo axle. So no swaybar at the rear.
ok thanks for the details,
I have a 12 or 16mm sway bar on my ford taunus real atlas axle (how many köln axle I have seen which the owner was persuaded to own an Atlas)
Cheers
Don't Scrap it, Restore it !
Hey man. Share a driving video already we want to hear it
Obstacles are those frightful things you see when you take your eyes off your goal.
Haven't droven yet
Plan is to get this running this summer and MOTted also. Just needs some modifications still, new radiator, new fuel lines for e85 and bigger injectors etc small stuff. But will do that! Escort will be done summer 2013 hopefully.
Hi
I was wondering if you can help me with something. .
I am trying to source the 4 headlight GXL grille for the cortina. Problem is that they are rare. Solution is that I found one but it is in the UK! What I need is approximate dimensions of the grille + weight if you can guess it for the grille + the sealed beam units.
I got quoted for 168 pounds in shipping only!! But I do think that it is a bit of a steal and not worth shipping over 250 pounds for the grille and 168 for shipping?? :/
Delivery is to Malta
Any idea were else I can find the grille?
Thank you! also Gratz on the project! Im building something more traditional to be used as an almost daily driver for now xD Take care!
Interior almost done, just little tweeks here and there still needed. But starts to look like car again!
Boot updated (new catch tank, new fuel lines, better secondary pump)
Oil catch tank finded place inside passenger side front wing
Engine bay now (bigger radiator, davies craig electric water pump, new fuel lines, 1260cc injectors, new fuel pressure regulator etc.)
That interior is awesome! Love it.
wow, awsome machine !!!!!!!!
Thank you guys for positive comments
Tested new rear rims, they are now 9,5"x15 and steel ofcourse.
Now that really does look great!
Engine bay looks like a plumber's nightmare
http://escort.accelerator.org
1968 MK1 Escort 1300GT
1969 'Big Wing' MK1 Escort
1972 MK3 Cortina 1600XL
1984 Sierra XR4i
And other junk I don't like to talk about!
what an awesome car, i love every bit of it and the interior looks so comfy and smart, really is a nice car, love the fat wheels your choosing too
really is brilliant this car
its not dead till it's buried!
T.I.T engineering. "Feel the power!"
Those seat look awsome dude! allmost like a factory option
Cracking car.....Not a fan of the Mk3 but that is one serious car.
Excellent workmanship gone into that. Keep the pictures and udates coming
Old skool forever
Just don`t tell the wife
how much it really costs!
Next week this will be at the dyno, hopefully nothing big breaks
Last edited by Sultzi; 03-07-2012 at 18:25.
After this pics, the car is now smoothened with P1500->P2000->P2500 papers and after dyno it needs just polishing up little bit
IMAG0014.jpg
_MG_4409.jpg
Nice
Looking forward to seeing the dyno results. Any wishes for what she'll put out?
67 TVR VIXEN V8
Will see. I'm happy with any over 300bhp
300+bhp should see that car moving quite a bit
Good luck on the rollers!
67 TVR VIXEN V8
Very nice mate!
Your tina looks great, I can't wait to hear it
Don't Scrap it, Restore it !
Dyno went pretty good, after changing spark plugs it stopped missfiring. Also bosch 044 pump is at the limit with this power and e85 fuel.
Dynosheet below
IMG_2835.jpg
Last edited by Sultzi; 12-07-2012 at 17:07.
thats 435 bhp around 380-400bhp on normal petrol
430bhp!!!!!!!! what a result!!!!!
its not dead till it's buried!
T.I.T engineering. "Feel the power!"
Cool !!!
Thank you guys
Here is a little vid from the dyno
http://sultzi.kuvat.fi/kuvat/Videoita/MVI_2834.AVI
On the road that must be massiv!
Great jod
435hp on the 2.8 V6, there's not problem with cylinderhead flex?
Don't Scrap it, Restore it !
Looks great, congratulations on all your hard work!
http://escort.accelerator.org
1968 MK1 Escort 1300GT
1969 'Big Wing' MK1 Escort
1972 MK3 Cortina 1600XL
1984 Sierra XR4i
And other junk I don't like to talk about!
Nice the wheels look great as do the rest of the car congrats.
Obstacles are those frightful things you see when you take your eyes off your goal.
I love Mk 3's....and this is one cool 'sleeper'......every thing is just spot on.....a credit to you sir.
Here's mine.....bought new in 1972.....rodded and raced all its life........
Sultzi.
Where did you get the hubcaps from that fit the saab rims? What are they from and what did you have to do to fit them? I'm after something similar for my saab rims.
Thanks, Shaun
Very good result must be really quick even with mine at 329bhp it was very quick and would pull 150mph with ease.
Great job you have done there
Paul
Thank you! Been driving around ~2000km maybe with this. A bit hungry for alcohol, 20l/100km in normal day use
Those hub caps where bought somewhere of ebay. They were hold by 5 magnets, but they weren't strong enough. Now driving without caps. I have saab own hub caps, but need to find out some way to cover that "saab" text in them
Oh, the cosworth t5 did give up, no 5th gear anymore! Been driving with 4 gears most of the time. Something strange happened, 5th on and accelerating suddenly it went like to neutral. Without any noises and the gear stick didn't bounc of the 5th. Did change oil, nothing gear peaces come out, just oil! So something strange must happened with gear selector inside box? Will find out during winter what it was..
Make a video we want to hear that beast
Obstacles are those frightful things you see when you take your eyes off your goal.
From what I hear 5th is the weakest gear on the T5's, advice is to only use it as a cruising gear. It's not made for big turbo power :-)
Regards
Gustaf
I heard the same, one 2.9l twin turbo sierra here finland also broke 5th from t5. But how can it be broken, when nothing metal pieces came out during oil change? That's why I believe something wrong with selector. Well, will find out before winter what it is..
Maybe somekind of video soon, possible
spins up well , you got lovely straight roads there too.
its not dead till it's buried!
T.I.T engineering. "Feel the power!"
Bookmarks