User Tag List

+ Reply to Thread
Results 1 to 10 of 10

Thread: '66 Anglia - Canada

  1. #1
    Tyre Kicker

    Join Date
    Apr 2016
    Location
    Langley BC
    Posts
    42
    Thanks
    0
    Thanked 1 Time in 1 Post

    '66 Anglia - Canada

    Here's my car when I first got it, stripped out the interior and pulled the motor.












    Battery rusted out the tray so I cut that out and had to also repair the front crossmember which was extremely rusted as well as the frame rail and the roll bar mount.














    Fixed the front hole where the bumper slots through, passenger side door was extremely rotten.














    Picked up a 1600 X-Flow from Vancouver Island






    Door back on, got the lines all sorted. Chrome trim not going back on so the moulding clips are all gone.







    Picked up Cortina GT brake calipers, hubs and rotors, also have MK2 Cortina Struts. Picked up a pair of 13x7s locally as well.







    Boot Lid all cleaned up. Have to replace some rotten parts on the inside.







    Front coming along.





    Just got my seats recovered and springs fixed.




  2. #2
    Tyre Kicker

    Join Date
    Apr 2016
    Location
    Langley BC
    Posts
    42
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: '66 Anglia - Canada

    Test fitted front suspension, sprayed whole car with slicksand, will be blocking down next and almost ready for paint






















    Shackle Fixed, both sides better now.






    Aaaand it's got some colour now!!




  3. #3
    Tyre Kicker

    Join Date
    Apr 2016
    Location
    Langley BC
    Posts
    42
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: '66 Anglia - Canada





    Sanded down, painted again. As perfect as I'll be able to get it this time. A few passes of the 2000 grit takes out any dust and the most minimal orange peel.. Polishes up nicely.

    Suspension going back in.

    Got a few things on order. Motor going in on Friday.










    Got to the front brakes, Got Copper/Nickle pipe from Burton Power. Never done brake lines before, but this still is super easy to work with, bends nicely, don't need to have the tool clamped into a vice to flare the ends, just do it right at the car. Forgot to slip the fitting on once or twice, left a little extra each time just incase anything needs to be re-done.








    Proportioning valve in, started running to rear.


  4. #4
    Tyre Kicker

    Join Date
    Apr 2016
    Location
    Langley BC
    Posts
    42
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: '66 Anglia - Canada

    Got the proper seals for the top half of the doors now.. they close.

    Replaced both 1/4 Window Seals. What a bitch.

    Brakes are done, all bled.

    Replaced the clips that hold the felt in the window.

    Started running aftermarket 12 circuit wiring harness.

    Dave dropped me off a steering wheel.

    Glass is back in both doors, they are pretty much done.

    Full interior kit from Aldridge arrived a few weeks ago, looks great. Still need headlining to go in, then will start putting glass back in.





    Shaved the valve cover, painted it. New gasket..

    Degreased and painted the gearbox. Steering is in now, The electrical is coming along.. Still wiring up the dash and rear lights and indicators.

    Headliner went in today, took the man about 1.5 Hours. Not bad!











    Interior will be going in next weekend.











    Trumpets on, new clutch installed, gearbox is in.. wow its heavy.


  5. #5
    Racer evans2822's Avatar

    My 1st Project
    Join Date
    May 2009
    Location
    Maesteg South Wales
    Age
    43
    Posts
    2,020
    Thanks
    138
    Thanked 119 Times in 115 Posts

    Re: '66 Anglia - Canada

    Looks a great little motor

  6. #6
    Pit Crew

    Join Date
    May 2010
    Location
    london
    Age
    53
    Posts
    1,045
    Thanks
    46
    Thanked 99 Times in 88 Posts

    Re: '66 Anglia - Canada

    lovely looking car...nice work...cheers mark

  7. #7
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    50
    Posts
    22,469
    Thanks
    215
    Thanked 1,748 Times in 1,635 Posts

    Re: '66 Anglia - Canada

    great stuff

  8. #8
    Tyre Kicker

    Join Date
    Apr 2016
    Location
    Langley BC
    Posts
    42
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: '66 Anglia - Canada

    Thanks all

  9. #9
    Tyre Kicker

    Join Date
    Apr 2016
    Location
    Langley BC
    Posts
    42
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: '66 Anglia - Canada




    Cut and reinforced gearbox x member

  10. #10
    Tyre Kicker

    Join Date
    Apr 2016
    Location
    Langley BC
    Posts
    42
    Thanks
    0
    Thanked 1 Time in 1 Post

    Re: '66 Anglia - Canada

    Fabbed up an axle mount and body bracket for my panhard bar today, got the shocks welded in fully both sides now as well.

    Did notice I will have to do something with my handbrake bar now.. Possibly just drill a hole through the mount or just bend up a new rod to go around the axle mount..









+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts