Hi all, selling my set-up, only due to upgrade.
Spec:

1600 xflow with 1300 GT pistons, standard bore.
ARP conrod bolts.
Kent BCF2 camshaft, timed in correctly with offset dowl.
Ported GT cylinder head.
Shortened/lengthened sump with removable baffle and windage tray.
Lightened flywheel.
Lucas/Aldon electronic ignition.
Small billet crank pulley.
Modified breather system into catch tank.
Inertia starter.
Alternator with larger pulley.
4 into 1 large bore exhaust headers with 2inch twin silencer system, with lambda boss.
36mm bike carbs on custom aluminium manifold, with foam sausage filter and correct bike fuel pump.
Type9 5 speed gearbox.
I'm sure there is plenty more I have forgotten.

Fully rebuilt around 2.5 years ago, every single gasket, seal, ring etc, was brand new.
Only covered 2000 miles since.
Starts on the button, and runs without fault.
Very well maintained and serviced.
Still in the car, so can be driven, then removed and taken with you.
Also happy to pallet and send, for cost.
















There are some videos on my YouTube of it starting from cold, showing oil pressure, and running up to temperature etc.
Also some it being driven.

https://www.youtube.com/channel/UCCq..._as=subscriber


£2000.

Located on the Isle of Wight.