User Tag List

+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 40 of 47

Thread: 2.0 Zetec Turbo Westfield Project!

  1. #1
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    2.0 Zetec Turbo Westfield Project!

    Hi all, nice to return to the forum! I used to have an account here but lost my login details from years ago and dont have my old email address so guessed ide start a new account... Hope your all well.

    So ive decided to build a 2.0 Blacktop turbo engine to put into a Westfield.

    I am considering using a blacktop bottom end with a st170 head as from what i have heard these mate straight up? the only thing im unclear on is that the st170 has VVT and i would need to remove this? are there any tips or hints people are willing to post on this thread regarding my idea?

    I have had a couple of small things arrive for the engine, Oil pressure gauge T peice to feed the turbo and the breather blanking plate, lapping stick with paste etc, but there is plenty in the post.

    Hoping to source a block at the end of the week.

    Cheers and all the best!

  2. #2
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Doing lots of research for the last 2 days it seems people are opting for a st170 bottom end with a blacktop head? i dont understand this as the flow and inlet ports are much bigger on the st head? who not just build a full st170 forged non vvt turbo lump? need some advice really, before when i lived in wales i almost completed a 2.0 blacktop turbo engine but had to sell it as circumstances changed. Looks like im starting to see a lot more options but need the best advice. I want to build it for 400bhp but run it at 350 with boost all the way through the range from 2.5k upwards to 6.5-7k

  3. #3
    World Champion Decade Plus User alladdin's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    May 2005
    Location
    s.wales
    Age
    60
    Posts
    9,200
    Thanks
    167
    Thanked 446 Times in 432 Posts

    2.0 Zetec Turbo Westfield Project!

    I have no knowledge on turbo zetecs at all but my guess is that the st bottom end offers a stronger package while blacktop head offers simpler cheaper advantage. Hence the combo. After all a turbo doesn't need the best head.


    Sent from my iPhone using Tapatalk

  4. #4
    Spanner Monkey

    Join Date
    Mar 2012
    Location
    Shropshire
    Age
    38
    Posts
    407
    Thanks
    13
    Thanked 32 Times in 31 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    As alladdin says, thats why that combo is used. Its sensitive to head gasket thickness though to get the compression ratio in the right area.

    At the power levels you are talking of though you wont be able to use a stock bottom end and for the power range you want you'll probably want a good quality twinscroll turbo

  5. #5
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Can anyone else chip in on this? i would be happy running 300 but want the engine to have scope for more.

    I have seen people do blacktop head on st170 bottom end and the other way around with a st170 head on a blacktop block?

    I planned to use origional crank but forged pistons and rods?

  6. #6
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Actually considering fully forging an st170 and removing the vvt and turbocharging that now

  7. #7
    Spanner Monkey

    Join Date
    Mar 2012
    Location
    Shropshire
    Age
    38
    Posts
    407
    Thanks
    13
    Thanked 32 Times in 31 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Standard crank should be fine with steel rods and forged pistons.

    Any reason you want to remove the vvt? If you have an ecu capable of controlling it, I'd say keep it.

  8. #8
    Bodger

    My 1st Project
    Join Date
    Dec 2006
    Location
    denmark
    Age
    36
    Posts
    64
    Thanks
    3
    Thanked 4 Times in 4 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Try asking this guy he is make 522 hk on a zetec.

    https://passionford.com/forum/member...boy522bhp.html

  9. #9
    Tyre Kicker

    Join Date
    Dec 2014
    Location
    Mk
    Posts
    45
    Thanks
    0
    Thanked 6 Times in 5 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Ok years ago i did a 2ltr Zetec turbo ... its was a silvertop out of a scrapyard and had covered nearly 200k ! it make 270hp & 315ft at 3500 @ 19 psi peak. it was bench dynoed by Harvey Gibbs SCS here is the spec ... This was in a mk5 red escort on steel 16' rims it was a right sleeper ... torque steer was interesting even with the LSD would sit @120 then fire right off the speedo and rest on the trip button lol.


    Stock crank and grind ( the bearings were that good you could have used them again in a N/A configuration )
    Stock rods / ARP rod bolts
    Stock Zetec head gasket.
    Stock Zetec cams & cam wheels
    Stock Zetec head and valves
    Stock Zetec headbolts
    Piper double valve springs
    Vauxhall XE turbo pistons ( bore was very good just required a hone with the correct stones to suit the ring materiel of the xe pistons)
    Zetec 1.8 alley inlet manifold
    Escort RS turbo exhaust manifold (head re-drilled to suit bolt pattern)
    Mixture of Escort cosworth and Saab turbo ... (water cooling removed)
    4 extra injector bosses welded in each inlet tract yes it was running 8 injectors sequentially ... 4 top ones running upto 10 psi then all 8
    8 ford Puma 1.6 injectors
    Saff cosworth 3 bar map sensor
    Saff cosworth intercooler
    Pectel T2 management
    Focus MK1 RS AP Clutch
    Escort RS 2000 gearbox & Quaife lsd with a Mondeo ST crown wheel (bell housing relived for pressure plate )


    Block & head chem cleaned and min decked & skimmed , CR was around 9.1 from limited memory
    Last edited by Dan Johnston; 18-05-2018 at 08:26.

  10. #10
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Thanks for all your input.

    As of this evening i now have the funds to go and buy lots and lots of goodies but i need your help.

    Do i?...:

    1. Buy a blacktop 2.0, forge the bottom end and turbo charge that?
    2. Buy a st170 engine, forge the bottom end and turbo charge that?
    3. Buy a blacktop block, fit a st170 head, forge it and turbo?
    4. Buy a st170 bottom end with a blacktop head and turbo?

    Done so much reading my head is all over the place. Just need some straight answers.

    Hope your all having a good weekend.

  11. #11
    World Champion Decade Plus User alladdin's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    May 2005
    Location
    s.wales
    Age
    60
    Posts
    9,200
    Thanks
    167
    Thanked 446 Times in 432 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    given that its for a westfield i think chasing huge numbers is a bit pointless so i will say 4 for a "budget" sensible build.

  12. #12
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Quote Originally Posted by alladdin View Post
    given that its for a westfield i think chasing huge numbers is a bit pointless so i will say 4 for a "budget" sensible build.
    Would like to run between 300-350 bhp.

  13. #13
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,110
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    get the turbo install and engine management side of things right and you can do that on a standard zetec

  14. The Following User Says Thank You to Graham For This Useful Post:


  15. #14
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Read somewhere on a 2.0 blacktop ide have to use the 1.8 water pump as if you do away with the powersteering etc and run a different belt setup the 2.0 pump runs the wrong way? is this correct?

    What else would i need from other engines?

  16. #15
    Racer Decade Plus User

    Join Date
    May 2012
    Location
    Camberley, Surrey
    Posts
    3,237
    Thanks
    5
    Thanked 353 Times in 339 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    The advice you are quoting is for a Silvertop not a Blacktop - there is only one B.Top water pump! If you lose the PS pump you either substitute a idler wheel in its place or replace the water pump impeller with a reverse pattern one allowing it to rotate in opposite direction and giving a shorter belt run - you also need a ribbed w. pump pulley - Ike Engineering does a whole kit - bit spendy but I just got the impeller - https://www.ikengineering.co.uk/prod...-pump-impeller - and a ribbed puley from someone on here.

  17. #16
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Quote Originally Posted by katana View Post
    The advice you are quoting is for a Silvertop not a Blacktop - there is only one B.Top water pump! If you lose the PS pump you either substitute a idler wheel in its place or replace the water pump impeller with a reverse pattern one allowing it to rotate in opposite direction and giving a shorter belt run - you also need a ribbed w. pump pulley - Ike Engineering does a whole kit - bit spendy but I just got the impeller - https://www.ikengineering.co.uk/prod...-pump-impeller - and a ribbed puley from someone on here.
    Super. Thankyou for the reply, this is the exact information i need and will be ordering one of those Tuesday Morning.

    I have the blanking plate for the block breather, but ive seen people tapping into them and running them to a catch tank? This is not ideally what i want to do as want to keep that side of the block looking smooth. Where else is recommended to take a breather from?

    Are there any changes needed to the sump, oil pump, flywheel etc?

    I will be forging the pistons and rods with a standard crank.

    Cheers Katana!

  18. #17
    TURBOSPORT SPONSOR Turbosport Subscriber
    Turbosport Moderator
    Turbosport Administrator
    Graham's Avatar
    My Race Car
    My 1st Project
    Join Date
    Feb 2006
    Location
    Ely, Cambs
    Age
    56
    Posts
    25,110
    Thanks
    310
    Thanked 2,476 Times in 2,250 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    if you going turbo, then you want a significant amount of breather capacity, on boost you will get considerably more blow by than with n/a.
    you need do nothing with the flywheel, but a lighter one will help it spool up on boost quicker, which in a westfield, might or might not be a good thing!

  19. #18
    World Champion Decade Plus User alladdin's Avatar

    My 1st Project
    My 2nd Project
    Join Date
    May 2005
    Location
    s.wales
    Age
    60
    Posts
    9,200
    Thanks
    167
    Thanked 446 Times in 432 Posts

    2.0 Zetec Turbo Westfield Project!

    Can't imagine that side will look very "smooth" with a turbo hanging off it 😀


    Sent from my iPhone using Tapatalk

  20. #19
    Racer Decade Plus User

    Join Date
    May 2012
    Location
    Camberley, Surrey
    Posts
    3,237
    Thanks
    5
    Thanked 353 Times in 339 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Agree with Graham - a turbo NEEDS big / lots of crankcase breathing. It may look untidy but that breather under the exhaust it pretty essential so i'd keep it - even if it was run to the cam cover that would have additional breathing added.
    Hmmmm fast spool + lightswitch power delivery + ltwt. car = potential accident LOL! Seriously any turbo will be a handful to drive without giving it boost just off idle.

  21. #20
    Pit Crew Decade Plus User

    Join Date
    Nov 2004
    Location
    Sweden
    Posts
    1,167
    Thanks
    3
    Thanked 98 Times in 95 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    A friend of mine is just finishing a Westfield with a Zetec turbo. As far as I know it is a stock Blacktop, just running E85 and Maxxecu management. ISTR it is mapped to around 240 whp and using a small Mitsubishi TD04-15 turbo the spool is quick (using a stock Zetec manifold with just the turbo flange welded onto it).

    It is not road legal yet so hasn't been driven too far and I can't say anything about how it will last. But it is a "brisk" car that puts a big smile on your face. Beware though, it takes some reflexes to handle!

    Gustaf

  22. #21
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Quote Originally Posted by Graham View Post
    if you going turbo, then you want a significant amount of breather capacity, on boost you will get considerably more blow by than with n/a.
    you need do nothing with the flywheel, but a lighter one will help it spool up on boost quicker, which in a westfield, might or might not be a good thing!
    Hi Graham, What if i was to tap into the blanking plate keeping it tight and neat to the side of the block, and run it to the top of a vented oil catch tank? Nothing else i can think of doing. The standard breather for that area is huge and i need to keep my mailfold/turbo tight to the area due to it going into a kit car.

    Unless i drilled and tapped the block on the intake side of the block and fitted a breather there? basically dead opposite side of the standard breather?

    Regards to the fly wheel, im unsure weather to keep the standard flywheel or skim it and reduce its weight a bit. Will it mate straight to a type 9 box? thats what i have in my head il use to transfer it to a LSD at the rear?

    Cheers.

  23. #22
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Also my Mocal Oil cooling sandwich plate has arrived but I've messed up and ordered it without the oil stat in it, so I've messed up there but don't want to send it back so will just fit an inline stat.

    Also had my Halfords Advanced set arrive which is sweet. Used to have the old set but i gave it away and bought the new advanced set

  24. #23
    Bodger

    Join Date
    Mar 2009
    Location
    sussex
    Posts
    148
    Thanks
    5
    Thanked 8 Times in 8 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    You might want to rethink the type 9 box. standard only good to 180bhp.... later 2.8 turbo boxes were better as had a better layshaft bearing. BGH make t9 boxes that are stronger. that or i would look for a T5 Cossie box or hybrid mt75

    some people have put t9 on V8s but dont launch them. ��
    Last edited by r2vdh; 09-06-2018 at 08:26.

  25. #24
    Racer Decade Plus User

    Join Date
    May 2012
    Location
    Camberley, Surrey
    Posts
    3,237
    Thanks
    5
    Thanked 353 Times in 339 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Quote Originally Posted by r2vdh View Post
    You might want to rethink the type 9 box. standard only good to 180bhp.... later 2.8 turbo boxes were better as had a better layshaft bearing. BGH make t9 boxes that are stronger. that or i would look for a T5 Cossie box or hybrid mt75

    some people have put t9 on V8s but dont launch them. ��
    They are supposed to be a weak point but there are many running over 200hp - the 2.8 / V6 needle bearings can be used in a 'std' 4 banger box. I would imagine a light wt. car that is traction limited with the power available shouldn't stress a T9 excessively although the low 1st gear would be virtually surplus to requirements.................unless you plan on towing a 'house on wheels'? Are you using a solid axle or inde Sierra rear?

  26. #25
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    2.0 Zetec Turbo Westfield Project!

    Hi all, sorry I’ve had a lot of time away from this project due to family commitments. Hope you are all well and still interested in my project!

    Have decided to go with a standard 2.0 blacktop turbo that I’m going to turbo.

    I’m currently away in the south of France but once I get home I will upload some pics of the goodies I have acquired.

    Been doing some reading and wondering what sump I need to use? As I said previously I will be eventually dropping this build into a Westfield kit car and think the standard 2.0 blacktop sump will be to low?

    Would love to go dry sump but including the total cost of the build including the car (from scratch) I feel I have to start cutting back somewhere. But I guess it could be an option?

    Any advice would be fantastic.

    Plan to use c20let pistons with forged rods.

    Cheers


    Sent from my iPhone using Tapatalk

  27. #26
    Spanner Monkey

    Join Date
    Mar 2012
    Location
    Shropshire
    Age
    38
    Posts
    407
    Thanks
    13
    Thanked 32 Times in 31 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Have you owned a Westfield or similar before? I assumed you already had one in the road not that this was going to be the first engine in a new build. If you haven’t had a similar car before I’d really recommend starting it with something less powerful than a 350bhp turbo setup! Even with experience of other 600bhp per tonne cars a lightweight car with that power will be a massive handful!

  28. #27
    Racer Decade Plus User

    Join Date
    May 2012
    Location
    Camberley, Surrey
    Posts
    3,237
    Thanks
    5
    Thanked 353 Times in 339 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Quote Originally Posted by theduck View Post
    Have you owned a Westfield or similar before? I assumed you already had one in the road not that this was going to be the first engine in a new build. If you haven’t had a similar car before I’d really recommend starting it with something less powerful than a 350bhp turbo setup! Even with experience of other 600bhp per tonne cars a lightweight car with that power will be a massive handful!
    Its a good point but there are no manuals / things to get experience with a bike with 370hp (1480hp / tonne) - didn't stop me building one though LOL!

  29. #28
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    2.0 Zetec Turbo Westfield Project!

    I used to have a Westfield with an 2011 R1 engine in and it was good fun. Just decided this is the route I’m going to take.

    Currently having a bit of an issue with the aux belt setup. I want to run the 3 pulley triangle shape as doing away with power steering air con and some idlers.

    So belt will go around the crank, water pump and then alternator and back to crank. I have ordered the correct impeller from IK engineering and also the ribbed pulley for the water pump.

    Where can I get a mount that holds the alternator to the block and then an adjustable piece to create the tension on the belt? Hoping somewhere might sell these 2 items as a kit?

    Cheers.




    Sent from my iPhone using Tapatalk

  30. #29
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    2.0 Zetec Turbo Westfield Project!

    Bump


    Sent from my iPhone using Tapatalk

  31. #30
    Racer Decade Plus User

    Join Date
    May 2012
    Location
    Camberley, Surrey
    Posts
    3,237
    Thanks
    5
    Thanked 353 Times in 339 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Retroford - combination of silver and blacktop kits IF you are not using the alloy belt cover casting - B/top only if using the casting.

  32. The Following User Says Thank You to katana For This Useful Post:


  33. #31
    Bodger

    My 1st Project
    Join Date
    Aug 2019
    Location
    Holland
    Age
    56
    Posts
    53
    Thanks
    1
    Thanked 3 Times in 3 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    just out of curiousity, why would you want to mix/match Zetec St170? A westfield weights next to nothing, and the zetc is good for 400hp turbocharged. It'll be a real
    challenge to keep this straight line on the road

  34. #32
    Racer Decade Plus User

    Join Date
    May 2012
    Location
    Camberley, Surrey
    Posts
    3,237
    Thanks
    5
    Thanked 353 Times in 339 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    The reason most of us do anything - Why Not! Just cos its daft doesn't mean it shouldn't be tried.

  35. #33
    Spanner Monkey

    Join Date
    Mar 2012
    Location
    Shropshire
    Age
    38
    Posts
    407
    Thanks
    13
    Thanked 32 Times in 31 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Quote Originally Posted by gid View Post
    just out of curiousity, why would you want to mix/match Zetec St170? A westfield weights next to nothing, and the zetc is good for 400hp turbocharged. It'll be a real
    challenge to keep this straight line on the road
    Couple of mates used ST170 bottom ends and black top heads, apparently the st170 bottom end is stronger so in stock form can run more power than a standard blacktop bottom end, but they didnt want the complexity of the st170 vvt system

  36. #34
    Bodger

    My 1st Project
    Join Date
    Aug 2019
    Location
    Holland
    Age
    56
    Posts
    53
    Thanks
    1
    Thanked 3 Times in 3 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Quote Originally Posted by theduck View Post
    Couple of mates used ST170 bottom ends and black top heads, apparently the st170 bottom end is stronger so in stock form can run more power than a standard blacktop bottom end, but they didnt want the complexity of the st170 vvt system
    thank you, now i can understand why.

  37. #35
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Hi Guys! Hope your all staying safe during the corona times!

    Sorry i haven't returned to the forum. I actually forgot i was a member here until i just stumbled across my thread! Luckily remembered my login!

    Long story short, and it is a long story so wont be doing to much typing. I did continue with this project and its came on leaps and bounds! Haven't got the car yet, still building the engine.

    So when i got back from France i instantly went and hired a small lockup about 20 mins from me... Its only 8x8x8 but super secure and plenty big enough to build the engine in.








    The following day i was driving out of my unit after popping over to build a work bench and lay some carpet down etc and i happened to spot a trailer with 3 blacktops in.

    After a half hour discussion with the guy i managed to get him to drop one straight into my unit using his forklift for £200.

    Purchased an engine stand and a few other bits and started tearing it down....





























    Now the Block was ready to be sent to my local engineering workshop, i will be doing mutiple posts tonight, just gonna do them in stages so i can make sure my post layout is okay as i havent organised my photobucket.

    Cheers.

  38. #36
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Got the block back from the machine shop after beind skimmed, honed and chemically cleaned... Then it was time for painting...










    After painting it was time to get the crank back in. Used King main bearings, brand new oil pump as after taking my previous one apart it was knackered. Got my mate to mill the housing back and weld a plate on so the aux belt can pass it. Also got him to make me a custom billet breather. I also ordered a CNC water pump pulley so whilst my mate was at it i got him to pump some holes in it to make it look nice...











    Next was to tackle the chore of cleaning up the head, relapping the valves, moving shims about to get the tolerances right etc...











    Moving swiftly on. Pistons, Rods, ARP head studs, Rebuilt head with uprated Heavy Duty piper valve springs etc...






















    So there is where i am currently. there's a few details i have missed out, but its taken me hours to sort my photobucket out and get all this in order.

    I got the end of my fuel rail welded up and i cut the lugs off the flow end so i can drill and tap it for an AN6 fitting to go straight in, and new injectors arrived this morning too...





  39. #37
    Racer Decade Plus User

    Join Date
    May 2012
    Location
    Camberley, Surrey
    Posts
    3,237
    Thanks
    5
    Thanked 353 Times in 339 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Unfortunately Photobucket no longer likes to share - so no pictures visible!

  40. #38
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Ah how annoying, that took ages!

    How can i add the photos here as when i try add media it fails, they are JPG's.

    Also wants me to do them one at a time?

  41. #39
    Racer Decade Plus User

    Join Date
    May 2012
    Location
    Camberley, Surrey
    Posts
    3,237
    Thanks
    5
    Thanked 353 Times in 339 Posts

    Re: 2.0 Zetec Turbo Westfield Project!

    Quote Originally Posted by katana View Post
    Unfortunately Photobucket no longer likes to share - so no pictures visible!
    All pictures visible now - some with watermark some without!

    I note you are using a ribbed water pump pulley for, I assume, the simple triangle belt run? If so - have you done the impeller conversion? Otherwise the pump is running backwards!

  42. #40
    Tyre Kicker

    Join Date
    May 2018
    Location
    England
    Age
    31
    Posts
    20
    Thanks
    2
    Thanked 1 Time in 1 Post

    Re: 2.0 Zetec Turbo Westfield Project!

    Hi katana,

    Yeah i will be running the triangle setup, thats why i had the belt cover machined so the belt can pass it.

    Yep got the IK Engineering CNC impeller on there. Some photos and bits and bobs i missed out in the write up. Took me long enough to do this one haha.

    Thank god the pics are starting to sort them selves out!

    Cheers.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts