X-flow water pump connector
I need some help!
I've got a water pump on my crossflow but there is no union in the top to marry the water pump to the heater pipe. I ordered what I thought would fit from Burton as it was the only thing remotely similar looking on the site (link below) but it is too big.
http://www.burtonpower.com/water-uni...ght-fp477.html
Has anyone got a clue of the size of this and where to buy one?
Thanks!
-
Re: X-flow water pump connector
3/8"NPT is the size for the XFlow waterpump.
I use the Burton FP379 (angled outlet).
http://www.burtonpower.com/water-uni...bow-fp479.html
-
Mechanic
Re: X-flow water pump connector
Worth winding a bit of Ptfe tape round it first.
Could save you some agro later on
-
Racer
Re: X-flow water pump connector
The pump connector is suppose to already be a 3/8 npt union that gaz has been supplied from BLurton and it won't fit.
-
Racer
Re: X-flow water pump connector
So someone has to measure the hole, measure the thread pitch and work out what is actually needed...........or buy a new water pump that hasn't been molested!
-
Re: X-flow water pump connector
Can you post a photo of the union next to the waterpump?
Is the union too big (NPT is a tight fit) or is the pillar too big for the hose?
-
Re: X-flow water pump connector
I went to a DIY store and bought some copper/bras item once … they had never seen a water pump of a '70 car …
-
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks