Chambered 1.6 Xflow Head (Port and Polish)

**Langlia** · 30-08-2018, 21:13

Anyone have anything? Running a GT head as far as I know on my 681F block at the moment.

**HonkyWhiteTrash** · 30-08-2018, 22:08

I may have got one.
So far as I know the chambered heads didn't come with GT size valves. Just 38mm ones.

If I do have one postage to you would be a problem!

**alladdin** · 31-08-2018, 08:48

Early 1600E had chambered head and they were GT spec so I believe.

Sent from my iPhone using Tapatalk

**Langlia** · 31-08-2018, 15:18

Let's see what you have.

I'm sure shipping is gonna be.. not so nice.. when I measured up a head to send to England it was roughly £100

**escoort** · 01-09-2018, 00:16

Got a chambered burton full race head with 43mm inlets and 39 exhaust valves, nicely ported. Has had a repair, and needs the new valves lapped in as had a bent one.
£250.

**Langlia** · 01-09-2018, 16:03

Thanks, looking for something that doesn't need any additional work.

**HonkyWhiteTrash** · 02-09-2018, 12:02

Originally Posted by Langlia

Thanks, looking for something that doesn't need any additional work.

You'll be lucky with chambered heads then as they aren't really favoured here for tuning. I have one that has been ported but will need new valve guides. And I have a standard one that will also likely need guides plus new valves (or valves re-facing).

**Frenchenstein** · 17-11-2018, 00:06

Originally Posted by HonkyWhiteTrash

You'll be lucky with chambered heads then as they aren't really favoured here for tuning. I have one that has been ported but will need new valve guides. And I have a standard one that will also likely need guides plus new valves (or valves re-facing).

Hi there,

Do you still have this cylinder head?