Hi All.
I want to laser cut an inlet flange for my custom Zetec inlet manifold but was wondering if someone has a PDF drawing (or similar) to save me measuring one from scratch?
Hi All.
I want to laser cut an inlet flange for my custom Zetec inlet manifold but was wondering if someone has a PDF drawing (or similar) to save me measuring one from scratch?
Cheers
Paul
someone posted one once, do a search. ive got a drawing i made, they fitted well . its however on a3 paper so i will have to see if i can scan a3 to pdf. let me know if you need it
HI Mate
Yes, I found the thread after I posted - DOH!
Thanks for the reply.
Cheers
Paul
i did that if you need a DXF file for a laser/wire eroder let me know
http://itsalmosttime.co.uk/blog/
Email sent........
Cheers
Paul
right click save as. *should work* never really used the FTP before
http://itsalmosttime.co.uk/lath/ZETECFLANGE.dxf
http://itsalmosttime.co.uk/blog/
works fine.
HI All
Thanks for the response but printing either the above DXF or the PDF drawing (from another post) does not match my Silver Top inlet gasket.
There is a big discrepancy between the port alignment with the mounts and the actual mounting point dimensions also.
Is it just me? Has someone else actually used this drawing for an actual flange?
I will update with what suits my OEM manifold gasket.
Also, I will alter the port dimensions to match the oval shape and ignore the injector relief.
Last edited by Zetec_RS; 24-04-2010 at 03:14.
Cheers
Paul
i will compare to my tried and tested drawing. mine has no injector reliefs.
OK, after a few hours in solid works I have a drawing to reflect the Silvertop inlet manifold with modified ports.
I cannot upload files - is there a prob with Windows 7 etc???
Cheers
Paul
seemed to fit the engine ok?
http://itsalmosttime.co.uk/blog/
That flange in your pic does not match any of the drawings found on this forum or the DXF file downloaded from the previous post
Cheers
Paul
is there anything drawn up for a cvh?
i tried having a look, but couldn't find anything
My Project... Fiesta D-TEC
i drew this one and have it fitted to my 2l silvertop now with rover 220 turbo inlet on not the cvh one as drawn, had to open 1 of the holes out a little tho......
dont know how to do the download clicky thing tho i have the files without cvhports too as its just overlayed on this pic, i can email if its needed??
Last edited by mercgrey; 25-04-2010 at 15:43.
Ah, I doubt the uploader likes Windows 7 so resorted to XP on the laptop and all OK.
Files below of what I have measured
Cheers
Paul
musta got versions confused in the sands of time, i've knocked up a couple of revisions, but this was like 3-4 years ago
http://itsalmosttime.co.uk/blog/
My Project... Fiesta D-TEC
does anyone have dwg drawings for intake manifold flange for ford zetec engine? Links above doesnt work
I've just drawn up 'Zetec RS's' pdf drawing in CAD and its mostly correct - the dimensions across the bottom don't add up to the dims across the top - there is a 1mm error somewhere and the top line is a bit 'guestimated as nothing to set it out........ but it looks ok!
If you want the files, I can post them up as AutoCAD .dwg or .dxf - but take no responsibility for them working or bolting to an engine ! ! !
Lol I need 10 post to send private messages. Member for 10yrs lol. I'll edit this later. inis1981@gmail.com
Sent - hope you get them!
Hi katana - could also please send me the dxf file - casper.kristiansen(at)gmail.com
Thank you :-)
Good afternoon katana, could i possibly grab the dwg andxf files aswell please.
Biscuit240@googlemail.com
Many thanks.
Could you email it to me please
Matt@top-dj.co.uk
thanks
Bookmarks