on the double width a.r.b. kits, how deep is the "slot" that the rubber sits in ? i have the rubbers and brackets here and want to weld up some mountings to suit but i want to know the seating depth so as not to over crush the rubber.
on the double width a.r.b. kits, how deep is the "slot" that the rubber sits in ? i have the rubbers and brackets here and want to weld up some mountings to suit but i want to know the seating depth so as not to over crush the rubber.
From memory it's about 3mm deep, or rather the raised sections that the metal clamps bolt onto are 3mm raised. They are very similar to the OE roll bar clamp arrangement anyway
Last edited by exboyracer; 19-05-2010 at 08:15.
http://escort.accelerator.org
1968 MK1 Escort 1300GT
1969 'Big Wing' MK1 Escort
1972 MK3 Cortina 1600XL
1984 Sierra XR4i
And other junk I don't like to talk about!
cheers
Bookmarks