User Tag List

+ Reply to Thread
Results 1 to 3 of 3

Thread: Fuel pressure regulator question

  1. #1
    Tyre Kicker

    Join Date
    Nov 2018
    Location
    Co Durham
    Posts
    7
    Thanks
    1
    Thanked 0 Times in 0 Posts

    Fuel pressure regulator question

    Hi, can anyone recomend a good boost referenced fuel pressure regulator for a blow through carburettor supercharged pinto using twin 45 dcoe's
    I would prefer one that uses the #6 fittings as im intending to run a max of 20lbs boost . Apparently the webbers normaly use around 3 lbs of fuel pressure so the regulator would need to rise 1.1 from 3 to 23lbs . Any info on the best one to use and where to get one.
    Many thanks

  2. #2
    Racer Decade Plus User

    Join Date
    May 2012
    Location
    Camberley, Surrey
    Posts
    3,236
    Thanks
    5
    Thanked 353 Times in 339 Posts

    Re: Fuel pressure regulator question

    Used a few of these and they work well enough..... http://www.officinamalpassi.it/en/ca...ted-turbo.html
    The threads are 1/8 NPT so adapters to #6 fittings would be required if wanted but 23psi isn't beyond rubber fuel hose if rated for EFI use which uses 3 bar pressure as std.

  3. #3
    Racer Decade Plus User

    Join Date
    Mar 2012
    Location
    Belgium
    Age
    56
    Posts
    2,118
    Thanks
    7
    Thanked 197 Times in 169 Posts

    Re: Fuel pressure regulator question

    Malpassi is probably the best (and only really working). Boosting your Webers with a roots type blower, I think you better change plans. It will not be easy.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts