Fuel pressure regulator question
Hi, can anyone recomend a good boost referenced fuel pressure regulator for a blow through carburettor supercharged pinto using twin 45 dcoe's
I would prefer one that uses the #6 fittings as im intending to run a max of 20lbs boost . Apparently the webbers normaly use around 3 lbs of fuel pressure so the regulator would need to rise 1.1 from 3 to 23lbs . Any info on the best one to use and where to get one.
Many thanks
-
Racer
Re: Fuel pressure regulator question
Used a few of these and they work well enough..... http://www.officinamalpassi.it/en/ca...ted-turbo.html
The threads are 1/8 NPT so adapters to #6 fittings would be required if wanted but 23psi isn't beyond rubber fuel hose if rated for EFI use which uses 3 bar pressure as std.
-
Racer
Re: Fuel pressure regulator question
Malpassi is probably the best (and only really working). Boosting your Webers with a roots type blower, I think you better change plans. It will not be easy.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks