User Tag List

+ Reply to Thread
Results 1 to 4 of 4

Thread: 32/36 DGAV jetting question...which jet where?

  1. #1
    Bodger Richb77's Avatar

    Join Date
    Jan 2018
    Location
    Outside Berlin, formerly Newmarket Suffolk
    Posts
    167
    Thanks
    22
    Thanked 5 Times in 5 Posts

    32/36 DGAV jetting question...which jet where?

    I've rebuilt my 32/36 DGAV to stock Mexico spec (whilst converting it to manual choke) and wondered. I have different sized main jets and mixer jets. Which ones go to which port? I am assuming the smaller to the main choke and the larger to the secondary (larger) choke?

  2. #2
    Pole Position Decade Plus User
    Turbosport Administrator
    Miniliteman's Avatar

    Join Date
    Feb 2004
    Location
    the Netherlands
    Posts
    4,888
    Thanks
    38
    Thanked 611 Times in 558 Posts

    Re: 32/36 DGAV jetting question...which jet where?

    Depends on the model/type of carb (and the aux venturis in it).

  3. #3
    Bodger Richb77's Avatar

    Join Date
    Jan 2018
    Location
    Outside Berlin, formerly Newmarket Suffolk
    Posts
    167
    Thanks
    22
    Thanked 5 Times in 5 Posts

    Re: 32/36 DGAV jetting question...which jet where?

    Venturis are both marked 35. As for model and type....Weber 32/36 DGAV I dont know what it was off of though. should add...the tag states.

    WEBER
    72HF KB
    B 2G20
    Last edited by Richb77; 12-02-2019 at 10:25.

  4. #4
    Pole Position Decade Plus User
    Turbosport Administrator
    Miniliteman's Avatar

    Join Date
    Feb 2004
    Location
    the Netherlands
    Posts
    4,888
    Thanks
    38
    Thanked 611 Times in 558 Posts

    Re: 32/36 DGAV jetting question...which jet where?

    Look for a typnumber like "3D1" on the body.
    Will look in my carb-note-book if I can find the 72HF KB typ.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts