Bodger
Carb to manifold stud thread size.
Im bloody useless with imperial threads and guess thats what i have here.
I have an Aluminium inlet manifold (no idea what from but its a Ford one) but no studs to hold the carb. Im not overly worried about the studs through the carb but what thread is in the inlet manifold?
Cheers
-
Racer
Re: Carb to manifold stud thread size.
Not much to go on ! If it definitely isn't M8 metric then it could be 5/16" either UNF or UNC................but could be bigger @ 3/8"
-
Bodger
Re: Carb to manifold stud thread size.
I wanted to challenge you all 😁.
Ill measure them to find out.
-
World Champion
Re: Carb to manifold stud thread size.
if not metric then it will be 5/16 unc in manifold with the threads holding down carb being 5/16 unf.
https://www.ebay.co.uk/itm/WEBER-DCO...YAAOSwSzdXDUVZ
if metric then both m8.
seller above will supply any combo or type
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks