Any Stroker cranks for pinto available?
Any Stroker cranks for pinto available?
You need to be a bit more specific in what stroke you are looking for, 84 and 88mm were quite popular strokes. These cranks would be machined out of EN40 steel so be prepared to spend strong money if you can find one. You might be better off to bite the bullet and buy new from someone like Farndon.
Everything over Std stroke is ok. I am curious if there are any user pieces for a reasonable price. New is an option though. But at certain budget.
indeed if you only want around 80mm, you can stroke a std crank by reducing the big end dia down to x/f size
Are there xflow rods available in forged steel? Or are Std items used?
these guys https://ivorsearle.co.uk/ they have done loads for me over the years, they do a lot of work for some quite big names in the performance world
ZRP list some, but none in stock.
https://www.zrp-rods.com/products/?p...et-crankshafts
Roland Alsop would be able to offset grind ok.
9.85 @ 145mph 202mph standing mile
https://www.youtube.com/watch?v=Ss_c7fML3rw
Bookmarks