CNC Parts,Pinto vernier pulley, Pinto breather, Jenvey spacers, Anti roll bar links

[jonboy]

I have a selection of CNC parts for sale. They are all made from 6082 T6.

Custom vernier pulley. These are stock pulleys with the centre machined out, a new adjustable centre has then be made which gives you the adjustment.







£55 delivered on exchange basis, will come with high tensile cap bolts.


Pinto breather, replaces kidney box, 2 piece design.



£10 delivered


18mm anti roll bar bracket, 3 piece, weld on plate. Supplied in pairs with all fixings. Available in any size.





£30 a pair delivered


18mm Anti roll bar yoke, bolts to your ARB, requires a drop link to suit your own car. Available in differernt lengths.





£30 a pair delivered


Jenvey throttle body spacers, made to suit tapered and dcoe type Jenveys.

DCOE fitment





Tapered fitment





£200 for 4 spacers to your spec

I currently have 4 to fit tapered Jenveys, they are 75mm in length, the same as the ones pictured above.

[whittle]

really nice kit! ;-)

[jonboy]

BTTT

Also available

Alloy -4 and -6 weld on fittings

8,10,12 and 16mm OD weld on swaged pipe fittings

Rad neck

Fuel cell screw on cap with short and long necks

More to follow

[Bower]

I wiill take block breather. Pm sent

[Cosnada]

I have a selection of CNC parts for sale. They are all made from 6082 T6.

Custom vernier pulley. These are stock pulleys with the centre machined out, a new adjustable centre has then be made which gives you the adjustment.

I guess these can be used for Cosworth application too - if so are standard Cosworth cam wheels ok as an exchange?

[jonboy]

They are Pinto fitment, I have no idea if they are the same as a YB uses, if they are then yes they could be used.

[jonboy]

Bump

[Sharkey]

Any news on the breathers yet?

[jonboy]

yes, have just dropped you a PM

[Sharkey]

Good quality breathers James

Thanks.

[jonboy]

Thanks Craig

[alladdin]

They are Pinto fitment, I have no idea if they are the same as a YB uses, if they are then yes they could be used.

i seem to remember reading that yb are cvh wheels.

[chriscapriman]

i'll have a breather please, pm sent

[jonboy]

Breather posted Chris.

Thanks again.

[Bower]

How's my breather coming on !!!!

[jonboy]

Will look into it for you, phoned him earlier but he was busy then found out its his birthday ! I will give him a buzz tomorrow and drop you a PM

[DENZIL]

can i get a breather aswell please when they are ready

[jonboy]

No problem, I'll know more in the next few days.

[mk2 wizard]

Breather please when they are ready please

[jonboy]

Breathers now in stock

[mk2 wizard]

PM ed

[jonboy]

Pm replied too

[jonboy]

Bttt

[dazzle]

Can I get one of them breathers please fella?

Many thanks

[jonboy]

No problem

I'll PM you now

[Troll]

I'll take a breather too please, can you PM me the details?

Mark

[jonboy]

PM sent

[Troll]

PM sent

Received, very nice bit of kit, well pleased with it.

Thanks jon.

Mark

[jonboy]

Bump

[jonboy]

Bump

[turbospud]

thanks for making a set of roll bar mounts to suit my bar,as add says james can get them made in any size,top quality too

[jorgo]

hi, do the verniers come with degree markings?

How much for one shipped to Australia?

Aaron

[jonboy]

The verniers do not have markings, I am sure I could have it done though.

Sorry for any delays in replying to people, my pc is dead and I've been loaned one from 1970 so progress is slow.

Lots of breathers on the shelf, most other items are available within 7 days.

[jonboy]

thanks for making a set of roll bar mounts to suit my bar,as add says james can get them made in any size,top quality too

Thanks Bill, appreciate the kind words.

[jonboy]

Upski !

More parts now completed.

[DENZIL]

jon any chance of getting a breather to me early next week ??

[dazzle]

Jonboy
Really sorry, forgot all about the breather!!

Don't suppose you're going to CF are you??

[rallyrob]

i seem to remember reading that yb are cvh wheels.

Forgive me if Im wrong but I seem to remember that the teeth on YB wheels are round cut to suit the cambelt while std pinto are square cut to suit a pinto belt. Im sure someone else must know that too.

Rob

[jonboy]

Hi guys,

I will be at CF so I can bring some along with me

Drop me a PM with your number and I'll call you when I'm there.

[jonboy]

Bttt